Papers by Author: Kalbinur Ahmat

Paper TitlePage

Authors: Ilham Abdureyim, Arkin Hamdulla, Mamatjan Tursun, Kalbinur Ahmat, Mamtimin Gheni
Abstract: The numerical controlled plastic film cutting machine in our design is used for flower bags making. It is composed of four parts; cutting mechanism, delivering mechanism, tool rest and machine bed. The tool rest is a critical structure to cutting and adhering operations. The tool rest is a long -thin rod with big span, usually it’s failure is because of bending deformation caused by less stiffness. In this study, we finished FEM 3D modeling of tool rest structure to increase its structure stiffness. We analyzed bending deformation characteristics of the tool rest, performed 3D FEM analysis and choose a relatively reliable structure after comparing maximum deformation in three different candidate structures. As a result, support structure of the tools rest was optimized, providing us a numerical data for structure reformation.
1393
Authors: Qiao Yu Xu, Kalbinur Ahmat, Xiang Liu
Abstract: Fine martensite could be gained in 70Mn2Mo cast steel roller after solidification by laser treatment. The hardness and depth of hardened zone reached 920 HV (about 65HRC) and 0.6mm respectively. After tempered in high temperature, the depth of hardened zone whose hardness was maintained above 430HV was 0.4mm. These results showed the better anti-tempering property and the higher hardness and hardened depth compared with water quenching and implied the greater applied potentiality of laser strengthening.
1359
Showing 1 to 2 of 2 Paper Titles