Papers by Author: Muhammad Sajjad

Paper TitlePage

Authors: Taeh Wan Jun, Hyun Chul Park, Kwang Ho Ahn, Muhammad Sajjad, Kwang Soo Kim
Abstract: The main purpose of this research work was to evaluate dust removal efficiencies using electrode plates coated with activated carbon in dust removal chamber. The experiments were performed with electrode-plates coated with activated carbon with black carbon and poly vinyl acetate (PVA) as binding agent. Methanol was added into the coating mixture for lowering the viscosity and at the same time helped the activated carbon (AC) pores not to be blocked by PVA. After coating the electrode surface, it was tested to collect dust in cylindrical chamber with and without power supply. In both case, AC coated electrode showed higher dust removal efficiencies compared to conventional aluminum electrode. Continuous test for PM10 dust control revealed that removal efficiency gradually increased with time passage, and as increasing the distance from inlet, the removal efficiency becomes stable. However, where the interval between electrodes was as short as 1cm, and also at the back of the chamber, “back discharge” effect was observed, and resolved easily by the elevation of humidity level. Volatile organic compounds (VOCs) were controlled successfully with the AC coating material so that it proved both particular and gaseous contaminants can be treated with this AC-coated electrostatic precipitator.*Corresponding author (Kwang Soo Kim): Daehwa-Dong 283, Goyangdae-Ro, Ilsanseo-Gu, Goyang-Si, Gyeonggi-Do, 411-712, Korea / kskim@kict.re.kr / Tel. + 82 31 9100 299 / Fax. +82 31 910 0291
85
Authors: Hyun Chul Park, Ju Haeng Lee, Il Ho Kim, Muhammad Sajjad, Kwang Ho Ahn, Kwang Soo Kim
Abstract: The purpose of this study was to investigate the sound proof properties of the double layer acryl plates with various packing materials inside. The acryl plates were filled with vacuum pressure ranged from-20 to-80 kPa, fumed silica as nanoporous materials, and HCFC (hydrochloro-fluorocarbon) as inert gas. The sound pressure level passed though panels was measured to compare soundproof performance. All other panel showed better performance from 500-1000 Hz than air layer panel. For the vacuum layer panel, panel with-80 kPa showed the best performance among other vacuum layer panel throughout all range of frequency. It is found that the more nanomaterial filled in panel, the lower sound proof performance. When it comes to panel filled with inert gas, the sound proof performance improved when it has greater pressure of gas.
89
Showing 1 to 2 of 2 Paper Titles