Papers by Author: Andre Rivière

Paper TitlePage

Authors: Andre Rivière
268
Authors: R. Schaller, Andre Rivière
276
Authors: Andre Rivière
635
Authors: S. Fusil, A. Zozime, R. Pénelle, F. Grillon, C. Le Paven, Andre Rivière, R. Triboulet
311
Authors: Andre Rivière, L. Fadel, J. Woirgard
671
Authors: Andre Rivière, L. Fadel, J. Woirgard
523
Authors: Andre Rivière, Michel Gerland, Veronique Pelosin
Abstract: Internal friction peaks observed in single or polycrystals are clearly due to a dislocation relaxation mechanism. Because a sample observed by transmission electron microscopy (TEM) often exhibits in the same time various dislocation microstructures (isolated dislocations, dislocation walls, etc.) it is very difficult to connect the observed relaxation peak with a particular dislocation microstructure. Using isothermal mechanical spectroscopy (IMS), it is easier to compare, for instance, the evolution of a relaxation peak with measurement temperature to the microstructural evolution observed by in-situ TEM at the same temperatures. IMS was used to study a relaxation peak in a 5N aluminium single crystal firstly 1% cold worked and then annealed at various temperatures. TEM experiments performed in the same material at various temperatures equal to the temperatures used for the damping experiments made possible to link this internal friction peak with a relaxation effect occurring inside dislocation walls. In two other experiments in a 4N aluminium polycrystal and in a metal matrix composite with SiC whiskers, it is shown that the observed relaxation peaks are connected to the motion of dislocations inside polygonization boundaries in the first case and in dislocation pile-ups around each whisker in the second one. Theoretical models proposed to explain such relaxation peaks due to a dislocation motion inside a dislocation wall or network are discussed.
21
Authors: Andre Rivière
Abstract: In spite of numerous works, the relaxation phenomena observed at high temperature (between room temperature and the melting temperature TM) are still under discussion. Because relaxation peaks were observed in single crystals, it is generally considered that the basis of the relaxation mechanism is linked to the dislocation network. The main difficulty for high temperature damping measurements is the great sensitivity of internal friction with several experimental parameters: the heating/cooling rate, maximal applied strain amplitude, sample purity, thermomechanical history of the sample, microstructure, etc. This sensitivity can explain the large scatter in experimental results published by various authors. Moreover, internal friction (IF) measurements performed during continuous heating or cooling and using an apparatus working at a quasi-static frequency, do not allow to completely describe the relaxation phenomena. On the contrary, isothermal mechanical spectroscopy (measurements of internal friction in a large frequency, temperature and maximal strain amplitude ranges) improves the experiments or evidences new relaxation effects. This is illustrated in this paper for various examples: slightly cold worked single crystals, polycrystals after a large cold work and recrystallization, non thermally activated peaks observed in metallic alloys, and relaxation peaks at very high temperature (above 0.9 TM).
87
Showing 1 to 10 of 17 Paper Titles