Papers by Author: Fan Xiu Lu

Paper TitlePage

Authors: Li Fu Hei, Fan Xiu Lu, Cheng Ming Li, Wei Zhong Tang, Guang Chao Chen, Jian Hua Song
Abstract: As an emerging brand new type of engineering material for a variety of important high technology applications, the deep understanding of the mechanical behavior of freestanding diamond films has become an emergent task of vital importance. Of the many deposition methods dc arc plasma jet has been regarded as the most promising technique for large area high quality and low cost production of freestanding diamond films. In the present paper, recent progress in mechanical properties of freestanding diamond films mainly by high power dc arc plasma jet with rotating arc root and gas recycling is reviewed. Testing methods for fracture strength and fracture toughness are discussed. Experimental data are presented and compared to that by MWCVD. Dc arcjet diamond films start to oxidize at about 700°C, however, oxidation up to 800°C for 10 min does not affect the fracture strength. Fracture mechanism is discussed. The strange mechanical behavior of freestanding diamond films is explained. It is surprising that CVD diamond film is such a kind of material which is strong, but full of different size of defects. It is hoped that the present paper will be helpful for those who wish to understand and use this brand new type of engineering material.
3059
Authors: Hui Qing Li, Cheng Ming Li, Guang Chao Chen, Fan Xiu Lu, Yu Mei Tong
Abstract: Interfaces between Mo substrate and free-standing diamond films prepared by DC arc plasma jet operated at gas recycling mode were investigated, including for the first time used and multi-time used substrate. The morphology, phase composition and bonding state of elements in the interface between substrates and diamond films were examined by optical microscopy, XRD and XPS. The profiles of carbon concentration of Mo substrates were measured by GDOES. It showed that Mo2C and MoC were formed on the first time used Mo substrate, and MoC was found on diamond films nucleation side after detachment. It suggested that MoC was peeled off from Mo substrate. The stable Mo2C on Mo substrate was formed after multi-time use of Mo substrate. However, MoC has not been found on it. The thickness of carburizing layer on the first time used Mo substrate is up to 30µm, and the carburizing layer on the multi-time used substrate is much thicker than that on the first used. The amorphous carbon in the surface of the substrate and nucleation side of diamond films was found by XPS, including for the first time used and multi-time used substrate.
3615
Authors: Fan Xiu Lu, Cheng Ming Li, Yu Mei Tong, Wei Zhong Tang, Guang Chao Chen, Jian Hua Song, Li Fu Hei
Abstract: As quasi-thermodynamic equilibrium plasma, DC Arc Plasma has the advantage of very high gas temperature and thus the very high degree of activation of the precursors for diamond film deposition. The present paper reviews the progresses in the R&D of the novel high power dc arc plasma jet CVD system with rotating arc and operated at gas recycling mode for large area high quality diamond film deposition, developed at the University of Science and Technology Beijing (USTB) in the mid 1990s of the 20th century. Thanks to the continuous efforts made in the technological improvement in the past 15 years, considerable progresses have been achieved in the commercialization of this high power dc arcjet CVD system, which is now capable of mass production of large area high quality freestanding diamond films for optical, thermal, and mechanical (tool) applications. The present status in the commercialization and the property level of the resultant diamond films in optical, thermal, mechanical, dielectric, oxidation resistance, sand erosion resistance, and laser damage threshold etc. are presented. Based on the same high power dc arcjet technology, a novel high current extended dc arc plasma (HCEDCA) CVD system has been developed which successfully changed the diamond film deposition mode from 2D planar deposition in to 3D deposition (as confined by two hollow (virtue) columns). It is demonstrated to be advantageous for mass production of diamond thin film coated WC-Co cutting tools. Recent results in the R&D of thin diamond film coated WC-Co drills and end mills, and the results in field tests are discussed.
1694
Authors: Syed Jawid Askari, Fan Xiu Lu
Abstract: The deposition of a well adherent diamond film on titanium and its alloys is always complicated due to the different thermal expansion coefficients of the two materials, the complex nature of the interlayer formed during diamond deposition, and the difficulty in achieving very high nucleation density. In this work well-adherent and smooth nano-crystalline diamond film was successfully deposited on pure titanium substrate by microwave plasma assisted chemical vapor deposition (MWPCVD) method in CH4/H2 environment. It is found that the average grain size was less than 20 nm with a surface roughness value as low as 28nm. Of particular interest in this study was the exceptional adhesion of approximately 2μm-thick diamond film to the metal substrate as observed by indentation testing up to 150 kg load. Experimental results on growth mechanism and obtaining good adhesion are discussed.
1145
Authors: Da Pei Tang, Qing Gao, Ying Hui Li, Fan Xiu Lu
Abstract: A multiple fields’ coupled model of new magnetic controlled DC plasma torch, which was used for CVD diamond film, was presented. In this model, the effects of electric field and magnetic field on the flow field and temperature field were taken into account, and the fluid dynamics equations were modified by the addition of some source terms relating to electromagnetic field, such as Lorentz force, joule heating, and radiative cooling. Conversely, the generalized ohm’s law was used to solve the current density, which reflected the effects of flow field and temperature field on the electric field and magnetic field. In addition, the rest Maxwell’s equations and external solenoid magnetic field equation were also modeled. In order to know the effect of external magnetic field on the torch, the current intensity of external solenoid was chosen to simulate its influence on the flow and heat transfer in the torch. Results show that external magnetic field plays a part in stirring the plasma, which is advantageous for the preparation of diamond film. The larger the external solenoid current intensity is, the better the uniformity of the temperature and velocity of plasma is.
2797
Authors: Y.L. Zhou, Guang Chao Chen, Guoan Chen, Cheng Ming Li, Yu Mei Tong, Fan Xiu Lu
Abstract: Structure-designed free-standing diamond films have been fabricated by DC plasma jet method. The different dominant crystalline surface distributions were obtained under different deposition conditions. The as-grown films were polished by thermal chemical method. For the same crystalline structure, the removal rate was strongly affected by polishing parameters, such as polishing temperature, polishing time and applied pressure. The experimental results also showed that the dominant surface distribution in the films affected the polishing removal rate very much.
3611
Authors: Fan Xiu Lu, Yong Ping Lv, Li Fu Hei, Wei Zhong Tang, Jian Hua Song
Abstract: Diamond film coated hard metal cutting tools are indispensible for high efficiency machining of materials which are difficult to cut by ordinary tools, and are successfully used in the dry cutting of high silicon content Al-Si cast alloys, graphite, carbon reinforced composite (CRFC) and metal matrix composite (MMC) , ceramics, and many other materials. In the present presentation, a novel process of High Current Extended DC Arc (HCEDCA) plasma CVD for mass production of diamond film coated hard metal cutting tools is presented. Besides, a novel process for the pretreatment of the hard metal cutting tool substrate, which involves the idea of “surface engineering” consisting of boronizing and alkaline and acidic etching is also discussed, by which the adhesion of the diamond film coating to the hard metal substrate can be greatly enhanced. Highly adherent and uniform diamond film coatings are successfully obtained. Diamond film coated WC-6wt%Co indexable tool bits, drills, endmill samples have been produced and been shown having excellent cutting performance by field cutting tests in dry cutting of Al-12%Si cast alloy and Al-15% SiC MMC materials.
766
Authors: Qi He, Cheng Ming Li, Fan Xiu Lu, Lawrence Pilione, Russell F. Messier
Abstract: Diamond and B4C coatings were used as an interlayer for the growth of cubic boron nitride thin films on c-silicon. By employing a B-C-N gradient layer on top of the B4C interlayer, improved adhesion occured between BN and B4C. A multi-step process after the nucleation of c-BN was found very helpful for improving the adhesion of c-BN on silicon with interlayers. Residual stress of c-BN thin film was significantly decreased by using a new post-deposition annealing treatment.
3635
Authors: H.P. Feng, H.X. Zhu, Wei Min Mao, Leng Chen, Fan Xiu Lu
Abstract: Free-standing CVD diamond films were prepared under the substrate temperature in the range of 850-1050oC. Macro- and micro-textures of the films were investigated based on the SEM observation as well as on the ODF and EBSD analysis. It was found that certain growth selection process appeared during diamond deposition which, however, did not lead to a strong film texture. It is indicated that strong fluctuation of growth ratio V<100>/V<111> and frequent growth twinning during film deposition resulted in randomization effect of grain orientations, which can be transformed by adjusting the parameters of film preparation.
1365
Authors: Syed Jawid Askari, Fan Xiu Lu
Abstract: Diamond coatings on pure titanium substrates are of interest for tribological and biomedical implants. However, due to the different thermal expansion coefficients of the two materials, the complex nature of the interlayer formed during diamond deposition, and the difficulty in achieving very high nucleation density, it is hard to deposit adherent thin diamond layers on titanium. The aim of the present research was to successfully produce smooth and well adherent nanocrystalline diamond (NCD) film on a pure Ti substrate using the microwave plasma chemical vapor deposition (MWPCVD) method. The influence of Argon addition to CH4/H2 plasma on the crystallinity, morphology and growth of the diamond film deposited by MWPCVD was investigated using field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), Xray diffraction (XRD) and Raman spectroscopy.
615
Showing 1 to 10 of 16 Paper Titles