Papers by Author: Gilles Guiglionda

Paper TitlePage

Authors: W. Robert, David Piot, Gilles Guiglionda, Julian H. Driver
Abstract: A simple and general new approach to predict deformation texture evolution during large plastic strains is presented. The stress in each grain, first calculated by a Taylor model, is then modified by the stresses of adjacent grains thereby making the local slip systems and lattice rotations neighbour dependent. Examples of texture simulations during hot rolling of aluminium alloys are given. The model predictions are compared with the standard Taylor model predictions and with ODF data of the textures measured during hot plane strain compression.
265
Authors: Dominique Daniel, Gilles Guiglionda, Pierre Litalien, Ravi Shahani
Abstract: Cost-efficient designs of aluminum autobody structures consist mainly of stampings using conventional technology. Progress in metallurgy and forming processes has enabled aluminum body panels to achieve significant market share, particularly for hoods. Fast bake hardening alloys with better hemming performance were developed for improved outer panel sheet products. Specific guidelines for handling and press working were established to form aluminum panels using similar schedules and production lines as steel parts. Stamping productivity was improved by optimization of the trimming process to reduce sliver/particle generation and resulting end-of-line manual rework. Both hemming formability and trimming quality not only depend on tooling setup but also on microstructural features, which govern intrinsic alloy ductility. Targets for the next high volume aluminum car body applications, such as roof panels and doors, require higher strength and/or better formability. The challenges of complex stampings can be met with optimized alloys and lubricants, with improved numerical simulation to fine-tune stamping process parameters, and with the introduction of new technologies. Warm forming was examined as a potential breakthrough technology for high volume stamping of complex geometries.
795
Authors: Gilles Guiglionda, A. Borbély, Julian H. Driver, B. Chenal
533
Showing 1 to 3 of 3 Paper Titles