Papers by Author: He Hua Zhu

Paper TitlePage

Authors: Feng Jun Liu, Lei Xie, He Hua Zhu, Ning Yu
Abstract: The rotational angle of joint is the key factor for segment lining design. Using the nonlinear finite element program of MARC (MSC2003), the 3D numerical analysis on segment joint of prestressed concrete lining has been carried out. During the analysis, Coulomb and Stick-slip friction models were used as the friction type between the concrete and the prestressing steel strands. The selection of friction model used in the numerical analysis is very important. The study showed that the Stick-slip friction model is more suitable than Coulomb friction model for analysis of the P&PCSL joint. The value of friction coefficient should be thought over carefully.
1853
Authors: Feng Jun Liu, He Hua Zhu, Ning Yu
Abstract: Based on the literatures and the existent researches, the study on segment joint of prestressed concrete lining has been carried out. The analytical solution for calculating the rotational angle of the joint are deduced with the calculation assumption. So the rotating stiffness of joint is obtained. Compared with the experimental results, the numerical calculation suggests that the theoretical equations are reliable. Study shows the slip length of prestressing steel strand near the joint is one key to calculate the rotational angle and rotating stiffness of joint. The matched curve of the slip length with joint bending moment is given in the paper, which can be described by logarithmic function. When the rotational angle of the joint is calculated, the slip length could be regarded as a constant to simplify the calculation.
1286
Showing 1 to 2 of 2 Paper Titles