Papers by Author: Jerzy Morgiel

Paper TitlePage

Authors: Joanna Wojewoda-Budka, Natalia Sobczak, Jerzy Morgiel, Rafal Nowak
Abstract: Interface reactions between liquid aluminium and ZnO single crystal substrates of <1-100> orientation (at 1273 K under vacuum) were examined using scanning and transmission electron microscopy techniques. The substrates were subjected to the “pushing drop” tests when liquid is deposited from the capillary on the substrate surface and then, after appropriate contact time, it is pushed away. After short time of interaction with <1-100>ZnO substrate, three phases were detected: α-Al2O3, the alumina of unknown type and ZnAl2O4 spinel formed due to the solid state reaction between Al2O3 and ZnO.
1267
Authors: Malgorzata Pomorska, Jacek Kaczmar, Jerzy Morgiel, Krzysztof Naplocha
Abstract: The metal matrix composites (MMC) were produced by force infiltration of preforms containing up to 10 vol % of Saffil fibers with AA6061 and EN AC 44200 aluminium alloys. The fibers were stabilized inside preform by dipping in liquid glass and heat treated at 800oC/2 hours. It allowed both to coat fibers with a thin layer of silica and bond fibers with amorphous silica bridges producing self supporting porous structure. The microstructure observations were performed using Tecnai FEG (200kV) transmission electron microscope. The performed investigations showed that infiltrating preform with AA6061 alloy with ~1 wt. % Mg caused reaction of silica with liquid metal substituting the former with porous amorphous Al2O3. A presence of MgO at the interfaces with aluminium matrix was noted. The infiltration with low magnesium EN AC 44200 (Mg <0.6 wt.%) alloy helped to produce composite with the silica bridges between fibers practically intact.
327
Showing 1 to 2 of 2 Paper Titles