Papers by Author: Ji Hao Duan

Paper TitlePage

Authors: Ji Hao Duan, Yao Yao Shi, Xiao Jun Lin, Ting Dong
Abstract: The blade and blisk manufacturing includes polishing process when the surface roughness and size requirement of profile are disqualified after milling process. This polishing process is mainly carried out manually by skilled workers or NC machines. However, the existing polishing technology always leads to surface quality instability and inconsistency because of the complex free-form surface of blade and blisk. Therefore, in this paper, based on the research of polishing requirements and methods of blade and blisk, an automatic 6-axis polishing machine was proposed in order to enhance surface quality. And then, a polishing mechanism was designed using flexible technique to make the polishing tool accommodate surface waviness which was produced in milling process. In addition, the working principle and control method of flexible polishing mechanism were studied. Finally, the polishing test results of blade and blisk showed that the profile error was about 0.06mm and the surface roughness was less than Ra0.4 after automatic polishing. Compared with the manual polishing process, the automatic polishing technology not only increased the polishing efficiency and quality stability, but also reduced labor intensity largely.
2454
Showing 1 to 1 of 1 Paper Titles