Papers by Author: Jürgen Biela

Paper TitlePage

Authors: Rudolf Elpelt, Peter Friedrichs, Jürgen Biela
Abstract: Since SiC VJFETs are believed to offer extremely fast turn on and turn off processes it is important to understand how these transients are tailored by the layout. Regarding the basic layouts two main topologies are under investigation today – structures with the well known SIT layout with purely vertical current flow and lateral vertical concepts where the current flow through the channel is in lateral direction and the vertical current flow takes place in the drift region only. In this paper we will focus on differences in the electric characteristics of both structures and the relation of the dynamic behavior to the topology and the layout of the switches. For the analysis, 1200V VJFETs based on the two basic topologies were manufactured having approximately the same total and active device area. It turns out that the SIT switches under investigation suffer from a high internal gate resistance in the p-doped layers and a relatively high gate drain capacitance.
933
Authors: Jürgen Biela, Mario Schweizer, Stefan Waffler, Benjamin Wrzecionko, Johann Walter Kolar
Abstract: Switching devices based on wide band gap materials as SiC o er a signi cant perfor- mance improvement on the switch level compared to Si devices. A well known example are SiC diodes employed e.g. in PFC converters. In this paper, the impact on the system level perfor- mance, i.e. eciency/power density, of a PFC and of a DC-DC converter resulting with the new SiC devices is evaluated based on analytical optimisation procedures and prototype systems. There, normally-on JFETs by SiCED and normally-off JFETs by SemiSouth are considered.
1101
Showing 1 to 2 of 2 Paper Titles