Papers by Author: Masatoshi Sudo

Paper TitlePage

Authors: Masatoshi Sudo, Yoshiyuki Hattori, Takashi Endoh, Hiroomi Hiramitsu
1187
Authors: Masatoshi Sudo
Abstract: Commercially pure aluminum (A1050) sheets have been cold- rolled in vacuum, to obtain high friction between rolls and sheet. This cold-rolling in vacuum successfully introduced large shear deformation near the sheet surface. The shear strain is the highest at the sheet surface, and rapidly decreased to zero at the quarter thickness. These high shear strains are sufficient enough to produce {111} and {001} cold- rolling, or shear texture. Conventional cold-rolling texture such as (001) [100], is naturally observed at the mid-thickness. It is confirmed that a high shear strain and probably steep strain gradient through thickness have a sufficient effect on the increase in {111} cold-rolling texture near the sheet surface. {111} cold-rolling texture is proved to be effective in the evolution of {111} recrystallization texture. This development will be discussed based on the cold-rolling texture change.
1551
Authors: Masatoshi Sudo, Tomohiko Iwase, Yoshiyuki Hattori, Madoka Nakajima
Abstract: In this study, we examined how the press formability of A1 alloys sheets and the generation of residual stresses was influenced by pre-coating resins, lubricants, die shoulder radius, the punch shoulder radius, and so on. The use of a pre-coated layer offers advantages by preventing direct contact between sheet metal and the face of the die, and also by enabling the use of volatile oil lubricants that keep the factory environment cleaner. The circumferential residual stress (σC ) of a cup becomes lower when the lubricant is less effective, and when the die shoulder radius is smaller.
358
Showing 1 to 3 of 3 Paper Titles