Papers by Author: Nathalie Allain-Bonasso

Paper TitlePage

Authors: Anthony D. Rollett, Francis Wagner, Nathalie Allain-Bonasso, David P. Field, Ricardo A. Lebensohn
Abstract: We examine the relationship between local gradients in orientation, which are quantified with the Kernel Average Misorientation, and the grain boundary network in an interstitial-free steel sheet, before and after 12% tensile strain. A portion of the unstrained microstructure is used as input to a full-field spectral viscoplastic code that simulates the same deformation. The orientation gradients are concentrated near grain boundaries in both experiments and simulation. Mapping out stress gradients in the simulation suggests that the development of orientation gradients is strongly correlated with such gradients.
463
Authors: Thierry Grosdidier, Xiang Dong Zhang, Jiang Wu, Nathalie Allain-Bonasso, Ke Min Zhang, Jian Xin Zou, Ying Qin, Xiao Na Li, Sheng Zhi Hao, Chuang Dong
Abstract: High current pulsed electron beam (HCPEB) is a fairly new technique for improving surface properties such as corrosion and wear resistances. One of the negative effects induced by HCPEB is the potential formation of craters on the surface of the HCPEB treated materials. These changes can impair the corrosion-resistance by promoting pitting. The mechanisms of nucleation and growth are detailed and the effect of the number of pulses on crater formation is discussed.
1700
Authors: Abdelhak Ayad, Nathalie Allain-Bonasso, Nadjet Rouag, Francis Wagner
Abstract: From an EBSD map made on a polycrystal one can define a set of grains using a criterion of misorientation between the adjacent pixels. Once such a list of grains is obtained, various quantities can be associated to each grain such as its size, (mean) orientation, GOS (Grain Orientation Spread) etc... The GOS associated to one grain is the mean value of the misorientations between all the pixels of the grain and the mean orientation of the grain. This value is quite sensitive to the state of the material (degree of plastic deformation, degree of recrystallization for example). Therefore it can help in interpreting the evolution of a microstructure during thermomechanical treatments. It is the purpose of this presentation to provide GOS values for an IF steel after several degrees of plastic deformation as well as after several annealing treatments which lead to partially or totally recrystallized states. The sources of influence on GOS values (as grain detection limit or grain size) are analyzed. The link between the values and the state of the material will be discussed at a global stage for a given population of grains.
269
Authors: Thierry Grosdidier, Y. Samih, Nathalie Allain-Bonasso, Bernard Bolle, Z.X. Zou, Y. Quin, Sheng Zhi Hao, Chuang Dong
Abstract: The low energy high current pulse electron beam (LEHCPEB) irradiation induces ultra fast dynamic temperature fields in the surface of the material to which is associated dynamic stress fields that causes intense deformation at the material surface and sub-surface. Improved surface properties (hardness, corrosion resistance) can be obtained using the LEHCPEB treatment. Under the “Melting” mode, the top surface (few µm) which is melted and rapidly solidified (107 K/s), can solidify has nano-domains formed from the highly under-cooled melt. The thermal stress wave that propagates in the sub-surface imposes strain hardening and grain size refinement. This induces a sub-surface hardening that can extent over about 100 µm. The use of the “Heating” mode is less conventional. This mode can promote grain size refinement, hardening as well as texture modification without modification of the sample geometry.
499
Authors: Thierry Grosdidier, Bernard Bolle, J.D. Puerta Velásquez, J.X. Zou, Jean-Jacques Fundenberger, Nathalie Allain-Bonasso, P. Chevrier, Albert Tidu
Abstract: This paper reviews some recent results concerning surface integrity of materials processed with two important developing techniques: high speed machining (HSM) – here applied to the difficult case of Ti alloys – and low energy high current pulsed electron beam (LEHCPEB) surface treatment of steels. The effect of the processing parameters on the development of microstructure, texture and residual stresses is detailed for modifications occurring both at the surfaces and sub-surfaces.
9
Authors: Francis Wagner, Nathalie Allain-Bonasso, Stephane Berbenni, David P. Field
Abstract: This paper deals with the study of plastic heterogeneity. It aims to study the role of both grain size and orientation distributions in the development of such heterogeneity. The considered material is an IF steel. EBSD maps have been made on the same areas before and after several degrees of extension. Parameters such as GOS (Grain Orientation Spread) or GOS/D (D the diameter of the grain) or GND (Geometrically Necessary Dislocation) densities have been determined for the whole set of grains as well as for subpopulations (smallest grains, largest grains for example). It appears that the character of neighboring grains plays a more important role than any of these parameters alone.
245
Showing 1 to 6 of 6 Paper Titles