Papers by Author: Pei Qing Liu

Paper TitlePage

Authors: Pei Qing Liu, Shuo Yang, Yun Tian
Abstract: During airplane’s take-off, higher lift force should be provided by wing used high lift devices, and the drag should be lower. The design basis of high lift devices with good aerodynamic characteristic is the design of the multi-element airfoil. When a multi-element airfoil is used Gurney flap, lift coefficient can be improved while drag coefficient is also increased, but the lift-to-drag ratio is reduced. In this paper, the numerical simulation method is used to study the aerodynamic characteristic of the multi-element airfoil used Gurney flap with slat in the configuration of take-off. Lift coefficient and drag coefficient of the multi-element airfoil with Gurney flap can be reduced by slat while lift-to-drag ratio of airfoil is increased. Through the comparisons of the multi-element airfoils with Gurney flap with different types of slats, the optimized multi-element airfoil with higher lift coefficient and lower drag coefficient is obtained ultimately.
229
Authors: Pei Qing Liu, Yan Xiang Cui, Liang Wang, Qiu Lin Qu
Abstract: Based on the characteristics of blowing control, a new technique was put forward to weaken slat cove separation and reduce noise. The effect of the slat blowing control on lift performance, the flow field and noise with a three-element high lift aerofoil was investigated by using the computational fluid dynamics (CFD) code of Fluent and the Reynolds-averaged Navier-Stokes equations. The blowing apertures were set on the lower surface of the slat. By using the slat blowing technique, the slat cove separation can be controlled efficiently and the lift coefficient increased. The aerodynamic performance varies with different blowing flow rates and angles of attack.
223
Showing 1 to 2 of 2 Paper Titles