Papers by Author: Qing Kun Zhou

Paper TitlePage

Authors: Zhi Yong Zhang, Qing Kun Zhou
Abstract: The construction and the operating principle of the novel micro-angular vibration testbed (MAVT) are presented, the MAVT is designed to complete the angular performance testing for the micro sensor and parts such as MEMS-gyro, angular accelerometer. A systemic design procedure of the optimized flexure hinge and general voice coil actuator (VCA) to fine single-axis MAVT actuator are introduced for fast and precision actuation. A method for measuring frequency response function by means of a displacement sensor electric eddy current sensor is designed. To verify the performance of the designed MAVT, frequency response of the system are performed, the differential equation of the pull-tilting motion is established according to the Lagranges equation, the formula of the natural frequency is derived, and the model analysis of the MAVT is also carried out with the help of limited element analysis. The static stiffness experiments show that the angular stroke of the MAVT is 1° and preliminary tests performed on the closed-loop control system indicate that angular resolution of 1 can be achieved. Model experiments performed on the prototype of MAVT are presented and the theoretic result fits with the result of experiment (250Hz). For fast and precision actuation performances, design parameters are selected based on the dynamic model of VCA and flexure hinge, and design process is completed. The model results can be provided for the construction design of the MAVT. Conventional platforms of angular performance testing are bulky and costly. Analysis and experiments results indicate that the novel MAVT is an efficient platform to complete the angular performance testing for micro sensor and parts.
587
Authors: Qing Kun Zhou, Sheng Jian Bai, Zhi Yong Zhang
Abstract: The design of variable structure system inputs which are constrained by saturation is studied. For a LTI system which satisfies some conditions, it is shown that appropriate bounded controllers guarantee the system’s global stability and maximize the sliding mode domain on the switching surfaces. Stability conditions of variable structure systems with constrained inputs are relaxed, and the stability of the closed-loop system is guaranteed by using passivity theory of linear passive systems. Moreover, nonlinear sliding surfaces are discussed for variable structure controller design, and a novel nonlinear switching surface is proposed. Finally, the proposed methods are applied to a 2nd order LTI system to show their usefulness.
1175
Authors: Zheng Hong Wu, Qing Kun Zhou, Da Peng Fan, Jian Neng Zhu, Jian Min Wang
Abstract: Construction of a rapid surface and processing is an effective way to improve the manufacturing efficiency, this paper linked the 3D scanning, fast surface construction and NC closely, described the whole process of surface data acquisition and processing, surface construction and the process of NC machining. The outer surface of the mouse was scanned from multiple angles by using 3D CaMega scanner, a plurality of point cloud was obtained, the point cloud processing, triangle face processing construct refinement of the model surface and grid lines were all processed in Geomagic Studio software, through adjustments, NURBS surface was generated. Also the mould surface of the mouse was constructed in the UG NX software. This paper wrote the machining process, Programmed NC Milling in UG NX software, generated the trajectory of rough and finishes machining as well as the programs of machining tool. Also CNC milling was processed CNC machining center.
598
Authors: Qing Kun Zhou, Ya Fei Lu, Da Peng Fan, Zhi Yong Zhang, Lian Chao Zhang
Abstract: A novel compliant linear buffer mechanism (CLBM) is designed for impact isolation. In view of the incompatible relationship between frequency characteristic and parasitic error of compliant linear mechanism, the mixed compliant linear mechanism(MCLM) is proposed by combining the Lumped Compliant Mechanism(LCM) and the Distributed Compliant Mechanism(DCM).The topology matrices for four kinds of parallelogram linear compliant mechanisms are built through the method of type synthesis. The characteristic polynominal (CP) for the compliant mechanism matrices[CM] are calculated for the isomorphism detection of compliant mechanism. The finite element analysis (FEA) model of these four kinds of linear compliant mechanism is built to complete numerical analysis on the structure frequency and parasitic error with different sizes, and the relationship between the frequency characteristic and parasitic error of the compliant linear mechanism is found out. MatlabTM software is used to obtain the functional formulas by the method of polynomial curve fitting (PCF) for The FEA results show that the structure configuration of MCLM can achieve a higher structure frequency and a greater kinetic precision over the pure LCM and DCM at the same time, and also indicates that the analysis method of frequency characteristic and parasitic error for compliant mechanism is efficient and should be effective on the structure optimization of the novel CLBM.
1181
Authors: Mo Hei, Qing Kun Zhou, Ya Fei Lu, Da Peng Fan
Abstract: In order to reduce the effect of carrier disturbance on the stability of line of sight (LOS) of the optical-electro stabilization system (OESS), a stabilization accuracy model of stabilization loop is built, and the main factors affecting the stabilization accuracy of stabilization loop in OESS are analyzed. Based on the on-line semi-physical simulation theory, a dSPACE measurement system of the LOS stabilization accuracy is designed to measure the LOS stabilization accuracy of the OESS, and the controller of stabilization loop is designed on the basis of the measurement data on-line conveniently. Experimental results show that the stabilization accuracy of the OESS with this method is 0.24mrad which is met the requirement. The novel method of stabilization accuracy measurement and controller on-line debugging for OESS can achieve higher stabilization accuracy and a greater efficiency over the classic method, and also indicates that this novel method is efficient and should be effective on further stabilization accuracy research of OESS.
895
Authors: Ya Fei Lu, Qing Kun Zhou, De Jun Sheng, Da Peng Fan, Zhi Yong Zhang
Abstract: Butterfly pivot is a large-travel rotational flexure pivot, which can provide elastic support for the rotational shaft in several ten degrees. Because of the complex structure, stiffness calculation of butterfly pivot is always completed by the method of Finite Element Analysis (FEA), which is not suitable for parameter design and optimization. The serial structure of four-blade isosceles-trapezoid (FBIT)is proposed to simplified the complex structure of the butterfly pivot. The FBIT is analyzed and the theoretical formula of stiffness calculation for rotation stiffness is derived in detail based on the essential theory of Mechanics of Materials. Design and optimization of rotation stiffness for each element can be achieved easily with the obtained the theoretical formula of rotation stiffness. The total rotation stiffness of the whole butterfly pivot is calculated and the rotation stiffness comparison between using the theoretical method and by the method of FEA is performed. The error between the theoretical rotation stiffness and the result of the FEA is less than 10%. It is acceptable and without any influence on the validity of the work and concept presented in this paper.
694
Authors: Qing Kun Zhou, Zhi Yong Zhang, Da Peng Fan, Hua Jie Hong
Abstract: This paper presents a novel compliant linear guided mechanism (CLGM) to replace traditional spring and translation joint to transfer motion and force with its advanced guiding characteristics. In view of the incompatible relationship between axial stiffness and transverse stiffness of CLGM, eight kinds of CLGMs were developed by using building block approach based on fixed-guided flexure beam. The finite element analysis (FEA) models of eight CLGMs were built to complete numerical analysis on the force-displacement in axis and off-axis direction with same geometric sizes. The FEA results show that the structure configuration of Type 2-Type 8 can achieve a larger axial travel, Type 2 and Type4 have the advanced guiding characteristic with higher ratio of axial/transverse stiffness. Analysis indicates that the building block approach is an efficient method to complete the conceptual synthesis of compliant mechanism and FEA is effective on the structure optimization for the required compliance and stiffness in axial and transverse direction.
1941
Showing 1 to 7 of 7 Paper Titles