Papers by Author: W.M. Huang

Paper TitlePage

Authors: Li Sun, W.M. Huang
Abstract: Abrupt softening phenomenon was observed in a shape memory CuAlNi single crystal upon uniaxial compression. Sudden martensite variant(s) reorientation was found to be the reason behind this anomalous behavior. The significance of this finding is twofold. On one hand, it clearly demonstrates that the stress induced transformation can follow a sequence of the phase transformation (martensitic transformation, austenite to martensite) and then reorientation (from one martensite variant to another). On the other hand, the anomalous softening provides a good evidence for explaining the propagation of the phase transformation front.
181
Authors: H.C. Yeo, N. Guo, W.M. Huang, H. Du, X.M. Jian
Abstract: The quality of the interfaces in multilayer composites is a critical issue in the reliability testing of the composite product during the manufacturing process and in-service. Weak interfaces have often gone undetected and may become potentially defective at a later stage. One example is the interface between mold compound and silicon (MC/Si) in IC packaging. There is a desire to study the interface quality quantitatively, so the potential defective area can be evaluated and identified early. In this paper, a nondestructive evaluation methodology is proposed to measure the available strength of the interface by using ultrasonic reflection coefficients. It is known that interface degradation can be either due to poor manufacturing process and stress loading. Characterization of the interface quality of the MC/Si interface is first conducted by measuring longitudinal ultrasonic wave reflections from the interface samples fabricated under varying conditioning processes that simulate the degradation. A combined test that measures the reflection coefficient of the interface under stress load has also been conducted to quantify the effect of the load. Finally, it is shown that the overall effect on the reflection coefficient and available strength of the interface is derived and can be used as a quantitative indicator.
1041
Authors: W.M. Huang, N. Liu, X. Lan, J.Q. Lin, J.H. Pan, Jin Song Leng, S.J. Phee, H. Fan, Y.J. Liu, T.H. Tong
Abstract: The surface morphology of materials is of fundamental importance to many applications (e.g., surface wetting, friction, surface roughness, reflection, drag, adhesion, etc). Various approaches for micro/nano patterning atop polymer surfaces have been proposed in recent years. However, a cost effective technique is still highly in demand. In this paper, we demonstrate a few novel but rather simple and generic approaches for surface micro/nano patterning using shape memory polymers (SMPs). Reversible micro vertical chains, crown shaped protrusion arrays and strip/labyrinth wrinkles atop SMPs are presented.
243
Authors: W.M. Huang, X.Y. Gao, Q. Ng, Q.Y. Liu, H.K. Kung, X. Liu
95
Authors: W.M. Huang, X.Y. Gao, B.K. Loo, L.M. He, B.K.A. Ngoi
87
Showing 1 to 5 of 5 Paper Titles