Papers by Author: Won Hee Lee

Paper TitlePage

Authors: Won Hee Lee, Dong Soo Kim, Jung Su Kim, Min Cheol Lee
Abstract: 3DP(three dimensional printing) technology is one of SFF(solid freeform fabrication) technologies which have recently come into a spotlight due to its adaptability to various applications. This technology has a great advantage in terms of short fabrication time for a prototype at a low cost, especially when it comes with multi-nozzle inkjet printing technology. However, it has also a disadvantage since it requires additional curing time, after jetting a binder material, and post-processing time in order to increase the mechanical strength of a product. In this study, a novel 3DP process is proposed to overcome slow solidification and elaborate post-process by adopting photo curing method into the conventional 3DP process. Mechanical properties, such as tensile and bending strengths, of specimens fabricated with the proposed 3DP process were measured and compared with those fabricated with the conventional 3DP process. As a result, it is found that mechanical strengths of specimens from the proposed novel 3DP process show three times higher than those from the conventional 3DP process. Besides, the overall fabrication time with the proposed novel 3DP process is about two times faster than that with the conventional 3DP process, because it does not need additional curing and post-processing time.
151
Authors: Won Hee Lee, Dong Soo Kim, Young Jin Ahn, Byung Oh Choi, Kyung Hyun Choi
Abstract: In order to develop more elaborate and speedy system for large objects than existing selective laser sintering (SLS), this study applies a new selective dual-laser sintering process. It contains a 3-axis dynamic focusing scanner system for scanning large area instead of the existing fθ lens. As sintering parameters, the sintering temperature, the laser beam power and the layer thickness have a great influence on sintering of the polymer and metal powder. This paper will address the development of a solid freeform fabrication (SFF) system employing the dual laser system. Experiments were performed to evaluate the effect of a scanning path and to fabricate the large-sized object.
123
Showing 1 to 2 of 2 Paper Titles