Papers by Author: Xue Tao Yuan

Paper TitlePage

Authors: Xue Tao Yuan, Xu Dong Lv, Yu Gao Zhou, Zhi Qiang Hua, Yang Lei, Lei Wang, Tao Li
Abstract: Over potentials for oxygen evolution reaction, corrosion rate, surface product after polarization and microstructure before and after polarization of Pb-0.2%Ag-0.08%Ca-0.05%Sr quaternary anode in zinc electrowinning were studied and compared with Pb-0.6%Ag binary anode. The results show that over potentials for oxygen evolution reaction on Pb-0.6%Ag and Pb-0.2%Ag-0.08%Ca-0.05%Sr anodes are 675 mV and 790 mV, respectively, while the corrosion current density are 8.2μAcm-2 and 20.1μAcm-2. The surface structure after experiment of in Pb-Ag anodes is dense and tightly attached to the base, while the surface of Pb-Ag-Ca-Sr is loose and porous. The phases of the surface are PbO2, PbSO4 and MnO2 on both anods.
85
Authors: Xue Tao Yuan, Xu Dong Lv, Zhi Qiang Hua, Lei Wang, Tao Li
Abstract: Anodic polarization behavior of ternary alloy Pb-0.08%Ca-1%Sn is studied by potentiodynamic polarization measurements, corrosion rate, the products on electrode surface after polarization, and microstructure of anode mud after polarization in electrowinning cell. The results show that Pb-Ca-Sn anode is easy to be passivated in electrolyte for copper electrowinning, the maintaining passivity current density is 97.72 µA•cm-2 and the corrosion products on the surface of Pb-Ca-Sn electrode present loose scaly, being composed of α-PbO2, β- PbO2 and PbSO4 after polarization.
349
Authors: Xue Tao Yuan, Zhi Qiang Hua, Lei Wang, Dong Bai Sun, Song Lin Chen
Abstract: Composite coatings were prepared using electroless nickel bath containing different concentrations of Al2O3 nano-particles. The analyses of coating compositions, carried out by EDS, showed that there is marginal difference between phosphorus contents of NiP and NiP/nano-Al2O3 deposits. The structure of the coatings was examined by scanning electron microscopy (SEM), and X-ray diffraction (XRD). It has been found that the co-deposition of nano-Al2O3 particles with Ni disturbs the NiP coating’s regular surface structure and increases its surface roughness. DC and AC electrochemical tests were carried out on such coatings in a 3.5wt.% solution of NaCl in order to evaluate their corrosion resistance. The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests both showed that, the corrosion resistance of NiP-Al2O3 coatings firstly increases and then decreases when Al2O3 concentration in electroless bath is increasing, but the corrosion resistance of NiP-Al2O3 composite coating is better than that of amorphous NiP coating.
1668
Authors: Yun Yi Wu, Xue Tao Yuan, Zhi Qiang Hua, Tao Li, Lei Wang
Abstract: The Bi3.25La0.75O12 films were prepared on the Pt/TiO2/SiO2/Si substrate using RF-magnetron sputtering method. The effects of sputtering conditions, including sputtering pressure, oxygen partial pressure and substrate temperature on microstructure, ferroelectric properties were investigated. When deposited at low substrate temperature (room temperature), the BLT thin film exhibits preferentially c-axis oriented. With the increasing of substrate temperature, the (117) diffraction peak become stronger, indicating the changing of the microstructure in the BLT films. The BLT film samples deposited at 4.5-6Pa exhibit desired bismuth-layered structure, with no any preferred orientation. However, when BLT films were deposited above 5 Pa, some weak pyrochlore diffraction peaks appear in the X-ray diffraction pattern. The Pr is a maximum for the BLT film deposited at 5 Pa with O2/Ar ratio 1/5 and decreases with both decreasing and increasing deposition pressure.
595
Authors: Xu Dong Lv, Xue Tao Yuan, Zhi Qiang Hua, Lei Wang, Tao Li, Yu Gao Zhou, Zhi Wei Wei
Abstract: Prepared lead dioxide(PbO2) coating on a Ti substrate by pulse current technique. The effect of the pulse current density, pulse time and relaxation time on the morphology and electrochemistry properties of the coating was studied by means of scanning electron microscopy and electrochemistry station. Compared with lead dioxide fabricate by common electroplate technique, lead dioxide coating prepared by pulse current technique is more dense, without hole, better corrosion resisting property and more stable electrochemistry properties.
590
Authors: Xue Tao Yuan, Dong Bai Sun, Zhi Qiang Hua, Lei Wang
Abstract: The growth morphology and structure of deposits during the initial stages of amorphous Ni-P electrodeposition was studied using atomic force microscopy (AFM), X-ray diffraction (XRD) and transmission electron microscope (TEM). Combined electrochemical and surface analytical measurements showed that the electrocrystallization process follows a three-dimensional instantaneous nucleation and growth mechanism. The structure of the Ni-P deposits progressively changed from polycrystalline to amorphous state with increasing electroplating time. Additional electrodeposition was carried out on amorphous carbon film at potential -650mV (SCE) for 5s in the same bath for plating Ni-P alloy. It was confirmed that the formation of crystal Ni at initial stage of electroplating Ni-P amorphous alloy was not caused by the epitaxial relationship between the crystal Ni and the crystal substrate and there was a nucleation process in the electrodeposition of amorphous alloy.
535
Authors: Lin Yuan, Song Lin Chen, Xue Feng Chen, Xi Jun Liu, Jie Zeng Wang, Xue Tao Yuan
Abstract: Researching and developing chrome-free refractory becomes a research hotspot at present because hexavalent chromium ions (Cr6+) may lead to environmental hazard. The additives lanthanum oxide (La2O3), effect on mechanism of spinel refractory react with cement clinker, several additives, such as cerium oxide (Ce2O3), titanium dioxide (TiO2), barium oxide (BaO), iron oxide (Fe2O3), are researched in this paper. It indicates that La2O3 is a suitable additive to MgO-MgAl2O4-ZrO2 brick which not only could stabilize phase transition of dicalcium silicate (C2S) in cement, but also do not impair the high-temperature-properties of spinel. The new environmentally friendly material spinel and lanthanum zirconate Composite is an excellent refractory for cement kiln which has high thermal shock resistance, good coating adherence, good corrosion resistance, higher mechanical strength, and longer service life than magnesia-chrome brick when they are used for sintering zone in cement kiln.
1179
Showing 1 to 7 of 7 Paper Titles