Papers by Author: Yu Shuang Huo

Paper TitlePage

Authors: Shu Bo Xu, Ke Ke Sun, Cai Nian Jing, Yu Shuang Huo, Gui Qing Wang
Abstract: In this paper, influence of temperature on warm temperature equal channel angular of AZ31 alloy was investigated by using numerical simulation and experimental investigation. The effective stress distribution rules and load-stroke curves viartions were obtained at different temperature. And the distribution of effective strain and the rules of deformation uniformity of three temperatures extrusion processing for round workpiece are obtained. The proper temperatures extrusion processing is acquired through comparing the results of three extrusion routes. The effect of the temperature on the accelerated grain refining during the ECAE operation was discussed in the numerical calculations with a view to the use of the process to bulk AZ31 alloys. On the basis of the simulations, the warm ECAE experiments are carried out. The geometries of finally pressed workpieces of the different temperature pressed samples are in good agreement with finite element analysis results.
296
Authors: Qing Zhou Sun, Jian Jing, Pu Qing Zhang, Yu Shuang Huo, Zhong Kui Zhao, Jian Wang
Abstract: The research represents the actual effect of clay and core sand content on the permeability, compressive strength and hot wet tensile strength of green sand by adding clay and core sand into green sand mixture in order to simulate the actual situation of clay and core sand continuously increasing in the used sand during the foundry production. It was found that the content of clay and core sand affect the permeability, compressive strength and hot wet tensile strength of molding sand. With the content of clau and core sand increasing, the permeability of molding sand reduces and has a peak when core sand reaches certain content; the strength of molding sand is high and stable when the content of clay and core sand is below certain amount, and then decreases with the content of clay and core sand increasing. For green sand with resin bonded sand, the effect of clay on hot wet tensile strength appears a curve of “Peak shape”, while for green sand with sodium silicate bonded sand, the effect of clay and core sand on hot wet tensile strength appears “Annual Ring shape” as whose center is the coordinate’s dot.
1224
Showing 1 to 2 of 2 Paper Titles