Papers by Keyword: Al6061 Alloy

Paper TitlePage

Authors: K. Jagannath, Sathya Shankar Sharma, P.R. Prabhu, Shankar M.C. Gowri, S.R. Harisha
Abstract: In the present work improvement in mechanical properties due to the presence of silicon oxide (SiO2) reinforced particles with an average size of 50μm and various weight percentage of (3, 6 and 9) on the hardness and fracture behaviour of Al6061-SiO2 composite is investigated. The influence of artificial aging with different aging temperatures on the mechanical properties was also assessed. Macro hardness and mechanism of fracture behaviour during tensile test have been discussed. Failure mode of fracture surface is studied to determine the parameters which influence the crack growth characteristics. Addition of SiO2 particles and artificially aging at 100°C for Al6061-SiO2 composite shows improvement in hardness by 140% and tensile strength by 60% due to the precipitation of finer secondary intermetallic phases of alloying elements. Fracture surface analysis for composite shows particle interface fracture and void nucleation growth failure.
59
Authors: K.V. Shivananda Murthy, R. Keshavamurthy, D.P. Girish
Abstract: Commercially available Al6061 alloy added with 5wt% of alumina particles was developed by liquid metallurgy route. Cast aluminum alloy and composite were hot forged. Microstructure, hardness and strength behavior of forged alloy and composite were investigated. Optical micrograph examination confirms the homogeneity in the dispersion of alumina particles. Addition of alumina particles increased the hardness and tensile strength by 21% and 18% respectively.
598
Authors: Sathya Shankar Sharma, K. Jagannath, P.R. Prabhu, Shankar M.C. Gowri, S.R. Harisha, U. Achutha Kini
Abstract: Present investigation focusses on combined effect of B4C and SiC on the improvement in hardness with an average size of 35-40μm on Al6061 hybrid composite. Composites are produced by stir casting process. The effect of artificial aging treatment with different aging temperatures of 100, 150 and 200OC on the improvement in hardness is also investigated. Optical micrographs and Brinell hardness number have been discussed. An attempt is made to find out the intermetallic phase responsible for strengthening by Transmission Electron Microscopy. Due to positive response to age hardening treatment there is an improvement in the mechanical properties of Al6061 alloy & its hybrid composite. The aging kinetics is more accelerated in case of hybrid composites as compared to unreinforced Al6061 alloy because of presence of reinforcement particulate, which act as nucleation site for precipitation. Artificially aged at 100OC shows improvement in hardness by 120-220% due to the precipitation of secondary solute rich phase of alloying elements as compared Al6061 alloy.
140
Authors: Gowri Shankar, U. Achutha Kini, Sathya Shankar Sharma
Abstract: Aluminium is ranked after iron and steel in the metal market. Aluminium 6061 alloy has been selected by many designers and engineers for different kind of applications. Further, its strength can be improved by cold working, refinement of grains, precipitation and dispersion hardening. In this work, trials are conducted for the investigation of the effects due to age hardening parameters like, solutionizing time, temperature and time for aging on hardness of 6061 Aluminium alloy using Design of Experiments. The response is predicted by using linier regression model. From the results it can be perceived that, the ageing temperature and aging time have a substantial effect on the response whereas, solutionizing time does not have a significant effect. For a specific set of parameters the hardness is improved from 50 to 74 BHN, resulted in an increase in hardness by about 50%.
27
Showing 1 to 4 of 4 Paper Titles