Papers by Keyword: Core Loss

Paper TitlePage

Authors: Hui Xu, Zhong Dong Yin
Abstract: Dry-type transformer is a high electric strength, high mechanical strength and high heat intensity transformer. With the acceleration of our city and countryside grid construction and the energy saving requirement in power industry, the application of dry-type transformer is expanding. Also, society proposes a higher standard in dry-type transformer. To improve its working capacity and reduce power loss further, we need to analyses its inner working conditions. This thesis uses finite element software ANSYS to build a model of dry-type transformer and gets its power loss and temperature distribution under different working capacity. After comparing this simulation results with experimental results, the accuracy of simulation method is proved. This simulation provides a structure optimization method of dry-type transformer. It can reduce design cycle and cost, help to spread the application of dry-type transformer.
181
Authors: Wei Lv
Abstract: For the past few years, nanocrystalline soft magnetic alloy has become hot topic in the field of strategic functional materials based on its excellent magnetic properties and advantages of energy saving, low cost, etc. With rapid innovationof various new type soft magnetic materials, FeCuNbSiB soft magnetic powder cores havebeen gradually turning into researching focusin soft magnetic material field for its excellent high frequency properties, such as high magnetic permeability (μ) and quality factor (Q), low core loss (Pc) and coercivity (Hc), etc.This paper mainly reviews the recent advances and technological achievements of FeCuNbSiB nanocrystalline soft magnetic powder cores, and also provides a brief introduction of FeCuNbSiB/Mn-Zn ferrite powder core, one new type composite magnetic powder core. Finally, future developing trend for FeCuNbSiB nanocrystalline powder cores isalso prospectedcompendiouslyin the paper.
233
Authors: Feng Qiao, Zhi Zhen Liu
Abstract: An accurate mathematic model of permanent magnet synchronous motor (PMSM) is necessary for precise torque control and/or high efficiency drive control. This paper discusses the development model of PMSM by taking all losses and saturation into account. In the proposed model, all losses composing of the copper loss, core loss, mechanical loss and stray loss were analyzed to improve the torque equation. In addition, considering the influence of saturation level, the variations of the core loss resistance, direct-quadrature axis magnetic inductance and permanent magnet flux were discussed on support of the data analyzed by Ansoft. In order to verify the developed model, a start up simulation is performed in the mode of open-loop and the results confirm the validity of the model.
505
Authors: Monika Jenko, M. Godec, H. Viefhaus, Hans Jürgen Grabke
747
Authors: Pornthep Chivavibul, Manabu Enoki, Shigeru Konda, Yasushi Inada, Tamotsu Tomizawa, Akira Toda
Abstract: A possibility to reduce core loss in non-oriented (NO) electrical steel by applying magnetic coating has been investigated. This technique involves electroless plating of magnetic coating onto the surface of electrical steel. The material system was NiCoP coatings with different thicknesses (1, 5, and 10 􀁐m) deposited onto the surface of commercially available Fe-3%Si NO electrical steel. Characterization of deposited NiCoP coating was carried out using X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectrometer. The deposited Ni-Co-P coatings were amorphous/nanocrystalline and composed of 56-59% Ni, 32-35% Co and 8-10% P by mass. Effect of coatings on core loss of the electrical steel was determined using a single sheet test. A core loss reduction was achieved with the NiCoP coating with a thickness of 1 􀁐m magnetized at a magnetic flux density of 0.3T.
21
Authors: Cheng Hu Du, Sheng Yu Dong, Jiang Ping Sun
Abstract: DC/DC converter modules have been used in military and civil industrials on a large scale. This paper mainly elaborates the application scope and characteristics of soft materials, which are used in DC/DC converter modules, and the effect of core type and integrating method on converter modules were researched. The development trend is pointed out combining with the technology of DC/DC converter modules.
72
Authors: Dina Maizana, Mohd Afif Mohd Radzi, Nuriziani Hussin
Abstract: This paper described the performance of transformer affected by different limb assembling. The experiment that used to investigate core is no-load, short circuit and load test to find the core loss, copper loss, flux leakage at corner joint and limb and total harmonic distortion of the flux at flux density range from 0.2 T to 1.6 T, 50 Hz. From the result of this investigation shows the core loss of transformer assembled with 2 limbs is 18.45% and 32.21% better than the transformer assembled with 3 and 5 limbs respectively at a flux density of 1.6T, 50 Hz. To increase the numbers of core limb assemble will reduce the efficiency of transformer.
1136
Authors: Satoshi Takemoto, Takanobu Saito
Abstract: Core loss of soft magnetic powder cores have been focused on to achieve high efficiency of power supplies. In this study the effects of crystal grain size on core loss were investigated by changing heat treatment conditions. It was found that core loss is influenced by crystal grain size because eddy current loss decreased and hysteresis loss increased by making crystal grain size smaller, and it is also influenced by the frequency and particle size.
1313
Authors: Ping Zheng, Jin Gang Bai, Cheng De Tong, Yi Sui, Zhi Yi Song
Abstract: A novel brushless compound-structure permanent-magnet synchronous machine (CS-PMSM) based on the magnetic field modulation principle is proposed for hybrid electric vehicles. As the key part of the brushless CS-PMSM, the operation principle of the electromagnetic planetary-gear machine (EPGM) is investigated by analytical method. The magnetic-field distribution and torque performance of the EPGM are studied by finite-element method (FEM). To obtain the optimal design scheme, the influence of the span ratio and thickness of the magnetic block and the slot-opening on the electromagnetic performance is investigated. Finally, the core loss distribution of the EPGM is investigated and the performance of this machine is fully evaluated.
215
Showing 1 to 10 of 29 Paper Titles