Papers by Keyword: Damage Assessment Indices

Paper TitlePage

Authors: Yong Hong, Byung Jin Kim, Dong Pyo Hong, Young Moon Kim
Abstract: Beam structures are a common form in many large structures, and therefore the real-time condition monitoring and active control of beams will improve the reliability and safety of many structures. However, the incipient damage, i.e. cracks, is not easy to be detected with using the traditional methods, such as modal analysis, etc. Piezoceramic (PZT) sensors offer special opportunities for the health monitoring of structures constructed by beams. The change of mechanical impedance of structures along with the occurrence of damage is sensitively indicated by the change of electro-impedance of PZT sensors. This paper presents work done on developing and utilizing PZT sensors to detect and quantitatively assess the extent and locations of cracks occurred in simulated structures. The PZT sensors are conducted particularly to generate the longitudinal wave along the beam specimen, and systematic experiments conducted on statistical samples of incrementally damaged specimens were used to fully understand the method, the cracks with different length and location are simulated to indicate the feasibility of the detection and assessment. To estimate the damage conditions numerically, in this paper, we propose the evaluation method of impedance peak frequency shift F and CC (Correlation Coefficient), Cov (Covariance). The results of experiments verify that the impedance peak frequency shift Δ F uniformly assesses the location of cracks, and as well CC. and Cov assesses the size of cracks efficiently. The study presents the method that is satisfied for much higher frequencies, alternate power, and minute damages.
2431
Authors: Gao Ping Wang, Yong Hong, Jae Jung Lee, Dong Pyo Hong, Young Moon Kim, Jae Yeol Kim
Abstract: We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic (PZT) sensors. The electroimpedance- based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the performance of the performance of the electro-impedance-based technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimen, i.e. the location of loosening bolts and the loosening extent of bolts are simulated, respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments. The analytical results strongly show the sensibility and reliability of the electro-impedance based technique.
2436
Authors: Yong Hong, Byeong Hee Han, Dong Pyo Hong, Sung Mo Yang, Young Moon Kim, Kyeong Suk Kim
Abstract: This paper describes a primary study for a new method of enhancing measurement with using an impedance analysis method that is applied to structural health monitoring. The goal of this research is to show basic information that is used to evaluate the structural health condition with using piezoelectric sensors. We present a study for the development of a practical and quantitative technique for the assessment of the structural health condition with using a piezoelectric impedance-based technique that is associated with longitudinal wave propagation. The natural frequency has a tendency of frequency shifting with respect to the hole size that corresponds to the real structure’s crack size. To numerically estimate the damage condition, we suggest the Cov (Covariance) and CC (Correlation Coefficient) evaluation methods.
2812
Showing 1 to 3 of 3 Paper Titles