Papers by Keyword: Flowing

Paper TitlePage

Authors: Li Wang, Ye Liu
Abstract: The detailed analysis in shengli coalfield, two East open-pit coal mine geological , hydro-geological characteristics and groundwater recharge, Runoff, drainage patterns. And on the analysis results of this analysis are mining areas of conceptual models of hydrogeology, numerical calculation method based on Visual Modflow first mining district 4 coal mine water water-bearing rock group. This article by multiple regression method using logging parameter estimation of permeability coefficient, solved in numerical simulation used in hydrological study on permeability coefficient of hole to determine does not meet the need of traditional issues.
1384
Authors: T. Liptakova, A. Alaskari, A. Dodek, P. Fajnor
Abstract: In the current study, the material corrosion behavior and degradation of a closed-loop copper piping systems were investigated taking temperature and flow parameters into consideration. To simulate the practical environment conditions, two identical copper closed-loop piping systems were constructed with three types of joints. Both systems were filled with 3% sodium chloride solution and run for about eleven months period. They were heated to a temperature of 80°C for eight hours a day and for 5 days a week. Outside that heating period, systems were maintained at room temperature (23± 2°C). Within such a heating interval, the contained solution for one system was kept in stagnation condition while it was flowing at input velocity of 0.27 m/s for the other. For both systems, the corrosion was then assessed and quantified using different evaluation techniques: Potentiodynamic test, Pourbaix diagrams, light microscope and scanning electron microscopy (SEM). The experimental results confirmed a diverse significant influence of solution flowing conditions on the damage of copper pipes.
18
Authors: Jia Xuan Wang, Chun Li, Li Hong Jiang, Min Fang
Abstract: In this paper, semi-solid slurry was prepared by power ultrasonic on flowing A356 melts. A simple device of ultrasonic treatment was made and the method of applying power ultrasound from the top of ingot was adopted. we investigated the influence of the experimental parameters impact on the size and morphology of the primary phase α-Al in A356 slurry, which included the power of the power ultrasound, treatment temperature and the distance between ultrasonic source and the melts ( here refer to from vibration head to the bottom of melt channel in this paper). The regularity of ultrasonic influence on grain refinement and morphology spheroidizing of primary phase α-Al in A356 alloy were obtained. The results show that when the loading power range from 800W to 1000W, the grain refinement effect goes more obviously with the increasing power of ultrasonic, howerer, when the power is up to 1500W, the effect goes worse; and the best primary phase is obtained at 615 oC among the four treatment temperature (645 °C, 630 °C, 615 °C, 600 °C); with the increase of the distance, among the four groups data (7mm, 9mm, 12mm, 15mm), the microstructure of A356 alloy goes more coarse and the segregation is more serious, the average grain size and form factor of the best primary phase α-Al was 29.47um and 0.78, respectively in this study.
1465
Authors: Ming Chang Li, Qi Si, Ying Wang
Abstract: A variable density anisotropic turbulent buoyant jet model is applied for simulating the current field under waves. The numerical simulation results show the present model is efficient to describe the construction characteristic of current field. This model could be an efficient tool for sewage treatment by deep sea discharge.
3460
Showing 1 to 4 of 4 Paper Titles