Papers by Keyword: Gyroscopic Torque

Paper TitlePage

Authors: Fei Hu Zhang, Peng Qiang Fu, C.H. An, Jiu Wei Sun, Sheng Fei Wang
Abstract: Ultra-precision flying cutting machining with a vertical milling style is an important means of ultra-precision machining. It has a close relationship between the machining accuracy and the dynamic characteristics of the aerostatic spindle. The film force acting on the spindle rotor is related to the manufacture, installation and static unbalance or dynamic imbalance or other factors. Therefore, it is necessary to analyze the dynamic pressure force caused by these factors in order to study on the rotor posture and quantitative movement of the spindle. This article derived the solution formula for the dynamic pressure reaction force of the ultra-precision machine tool spindle with vertical static film based on the basic theory of the rigid body dynamics. The gyroscopic torque of the spindle has been analyzed under different conditions with the spindle dynamic balancing tests, which provide a reference to the further analysis of the spindle dynamic characteristics.
686
Authors: Peng Qiang Fu, Qiang Zhang, Fei Hu Zhang, Chao Zhang
Abstract: This paper provides the transfer matrix method to analysis the natural frequency of the vertical spindle using on ultra-precision fly cutting machine tool. Several transfer matrix equations of the typical units of the spindle had been established when considering the effects of the gyroscopic torque as the rotor has a large inertial tensor. And then the natural frequencies and each modal shape of the spindle rotor system were calculated using the transfer matrix model. Also, the modal experimental test had been taken out. The theoretical results from the transfer matrix model are very close to the test results, and the accuracy and the effective of the model was proved.
680
Showing 1 to 2 of 2 Paper Titles