Papers by Keyword: Melting Behaviour

Paper TitlePage

Authors: Thomas Kronberg, Leena Hupa, Kaj Fröberg
Abstract: The influence of wollastonite and dolomite on melting behaviour and crystallization was studied for 25 raw glazes. The melting behaviour was observed by hot-stage microscopy. The glazes were also fired industrially both in a fast-fired gas kiln for floor tiles (50 min) and in a traditional gas kiln for sanitaryware (25 hours). The surface composition and structure of the glazes were studied by SEM/EDXA. The crystalline phases in the glazes were identified by XRD. Main crystalline phases found in the glazes were wollastonite and diopside. Fusibility and surface structure on the raw glazes containing wollastonite and dolomite as raw materials depended both on the total content and the ratio of CaO and MgO in the glaze. Low content of alkaline earths gave incomplete fusion, while high content gave extensive crystallization. The results can be applied to tailor raw glaze compositions for a desired surface structure to be fired at a certain fusion temperature.
590
Authors: Yu Chen, Yang Yu, Wen Cong Zhan, Er De Wang
Abstract: Ni-30wt%Fe elemental power mixture was mechanically milled under argon atmosphere for variuos times up to 25h.The evolution of Ni-Fe alloying during milling and the microstructure of the as-milled powders were characterized by XRD, EPMA (electron probe microanalysis), SEM and TEM, respectively. The results show that nanocrystalline Ni (Fe) supersaturated solid solution alloy powders with 30wt. % Fe in composition can be synthesized by mechanical milling of the elemental powder mixture. Both the content of Fe dissolved and the microstrain developed in the as-synthesized Ni (Fe) solid solution phase increase, while the crystallite size decreases, steadily with increasing milling time. In particular, the Ni-30wt%Fe alloy powders obtained by 25h milling consist of a single Ni (Fe) supersaturated solid solution phase with average crystallite size of about 15nm and accumulated microstrain as high as 1.12%. DSC tests show that the nanocrystalline Ni-30wt%Fe alloy powders have a lower melting temperature than the elemental powder mixture, attributed to the unique Ni (Fe) solid solution phase structure, the nanocrystallization, and the high strain energy.
38
Authors: Chen Liu, Kang Zheng, Xia Yin Yao, Xian Zhang, Xiang Lan Liu, Ruo Xi Wang, Xing You Tian
Abstract: The melting and recrystallization behavior of Poly(ethylene terephthalate) (PET)/SiO2 nanocomposites after isothermal crystallization from the melt was studied by Step-scan differential scanning calorimetry (SDSC). The influence of SiO2 contents, crystallization temperature and crystallization time on the melting process were examined. Two melting endotherms(in the SDSC CP.A curves, reversible part) and one recrystallization exotherm (in the SDSC CP.IsoK curves, irreversible part)of PET/SiO2 nanocomposites after isothermal crystallization were observed during the melt process. This ascribes to the melting-recrystallization mechanism .The low temperature endotherm attributes to the melting of primary crystal formed during the isothermal treating and the high temperature endotherm resulting from the melting of recrystallization materials. The reason why more recrystallization happened with the increase of SiO2 content was given and the process of recrystallization was described in detail. The effects of crystal perfection and recrystallization were minimized by increasing of crystallization temperature and time.
69
Showing 1 to 3 of 3 Paper Titles