Papers by Keyword: Optical Window

Paper TitlePage

Authors: Alireza Hajialimohammadi, Saeed Ahmadisoleymani, Amir Abdullah, Omid Asgari, Foad Rezai
Abstract: Constant volume transparent test combustion chambers are extensively used for investigating injection and fuel burning properties of various combustion engines. Their configuration depends on the engine type and the research purpose. Material of components, shape and dimensions of the chamber and its parts, ease of use, accessibility, sealing and safety of the assembly are the parameters needed to be considered in designing the test cell. This paper explains, structural design of a test combustion chamber and its optical windows using finite element analysis of ANSYS 12.0 software for bearing high pressure variations and thermal shocks of combustion. It was designed for conducting CNG direct injection study on direct injection SI CNG engines for maximum design pressure of 100 bars. Optical diagnostic methods and high speed photography through quartz windows are used for the jet and flame developments. Satisfactory test results of the fabricated system proved that the finite element method can successfully be employed for design of such a system.
2539
Authors: Marijke Jacobs, Guido Van Oost, Joris Degrieck, Ives De Baere, Andrei Goussarov, Vincent Massaut
Abstract: Glass-metal joints are needed for the optical windows in ITER to perform diagnostics. These joints must be leak tight for the safety (presence of tritium in ITER) and to preserve the vacuum. They must also withstand the ITER environment: temperatures around 250 °C and neutron fluxes of 109 n/cm2.s. At the moment, little information is available about glass-metal joints suitable for ITER. Therefore, we set-up a 2D elastic model of prototype Al diffusion bonded optical windows using Abaqus code to model temperature effects on the windows. With this model we analyzed the influence of different parameters like the joint area and the braze thickness on the mechanical properties of the joint. Calculations of the thermal stress created by a temperature field of 150 °C (normal ITER temperature) showed that the Al-bond is the weakest part of the window. To find a way of reducing the thermal stress, the influence of some parameters has been studied. In particular, a specific thickness of the Al layer can result in a minimum of stress in the Al bond while the joint area and the thickness of the glass have only a small influence on the stress in the windows. The calculations allowed to propose an optimized design for the windows prototypes.
145
Authors: Mihai Lazar, François Jomard, Duy Minh Nguyen, Christophe Raynaud, Gontran Pâques, Sigo Scharnholz, Dominique Tournier, Dominique Planson
Abstract: 4H-SiC vertical bipolar power diodes have been fabricated with bilayer metallic anode contact based on an Al-Ti-Ni ohmic contact and a thick Al over-metallization. An optical window of 100 × 100 μm2 has been created through the anode contact with a SIMS Cameca IMS 4F equipment using Cs+ primary ions at 10 kV and with a beam spot size of 100 nm. The current/voltage characteristics of the diodes show that the SIMS process does not induce an increase of the leakage currents in forward nor in reverse bias. OBIC UV photogeneration occurs under the optical window and not under the contact metal.
885
Showing 1 to 3 of 3 Paper Titles