Papers by Keyword: Bioceramic

Paper TitlePage

Authors: Thomas Miramond, E. Aguado, E. Goyenvalle, Pascal Borget, Serge Baroth, G. Daculsi
Abstract: Calcium phosphate bioceramic granules associated with hydrosoluble polymers formed putties currently more used in clinical applications as they are easy to handle (injectability, moldability). In this study, 2 kinds of materials were tested in rabbit bone defects. The first one is InOss (Biomatlante), a microporous biphasic CaP granules (BCP, HA/TCP mixture) with polysaccharidic hydrogel; and the second one is Actifuse ABX (Baxter/Apatech), pure hydroxyapatite granules containing silicate (HA-Si) with blocks copolymer hydrogel (poloxamer), . The aim of this study was to compare osteogenic properties of two kinds of CaP putties containing HA-Si versus BCP and the kinetic of resorption of their hydrogel. Data have demonstrated that both hydrogels increase the handling properties. Bone regeneration was observed in the two types of sample, however at 3 weeks, Actifuse ABX hydrogel was not totally absorbed, while InOss hydrogel was no longer observed. The second difference observed was osteoconduction. Newly formed bone over the time period studied was moreover in close contact with BCP granules than with HA-Si granules. Larger granules resorption on time was observed for BCP compared to HA-Si. Resorption of Actifuse ABX remains limited and explains the faster kinetic of absorption for InOss. This study demonstrates biocompatibility, absorbability and bone ingrowth at the expense of the two types of putty injectable/moldable bioceramic used for bone regeneration.
Authors: Girts Salms, Ilze Salma, Andrejs Skagers, Janis Locs
Abstract: Clinical and radiological outcomes of one and two stage maxillary sinus floor augmentation with HAP granules and dental implant insertion, degree of mineralization of residual bone and augmented sinus part were evaluated. 180 dental implant insertions in 84 patients in the age from 32-68 years were included in this study. Patient clinical and CBCT (Cone Beam Computer Tomography) were analyzed by quantitative radiodensitometry using HU (Hounsfield units) after 1 to 5 years after functional loading. Four implants were lost during osseointegration phase the 176 implants survived. We found 2.5 times denser synthetic HAP/bone area comparing with residual bone. With time there was a decrease in radiodensity in HAP augmented maxillary sinus area and an increase of radiodensity in the area of residual alveolar bone.
Authors: Yang Leng, Ren Long Xin, Ji Yong Chen
Abstract: Bioactive calcium phosphate (Ca-P) formation in bioceramics surfaces in simulated body fluid (SBF) and in rabbit muscle sites was investigated. The examined bioceamics included most commonly used bioglass®, A-W glass-ceramics and calcium phosphates in orthopedic and dental applications. The Ca-P cyrstal structures were examined with single crystal diffraction patterns in transmission electron microscopy, which reduced possibility of misidentifying Ca-P phases. The experimental results show that capability of Ca-P formation considerably varied among bioceramics, particularly in vivo. Octacalcium phosphate (OCP) was revealed on the all types of bioceramics in vitro and in vivo experiments. This work leads us to rethink how to evaluate bioactivity of bioceramics and other orthopedic materials which exhibit capability of osteoconduction by forming direct bonding with bone.
Authors: Kanthi Lewis, U. Boonyang, L. Evans, S. Siripaisarnpipat, Besim Ben-Nissan
Abstract: This study aims to characterize the structure and properties of crocodile bone to assess the potential for use in biomedical applications. Crocodile bone samples obtained from Thailand (Crocodylus siamensis) and Australia (Crocodylus porosus), being the tail and the tibia respectively, were treated to remove organic material and the inner spongy (trabecular) material. The dense cortical bone was used for comparative instrumental analyses. Specific comparisons were made against bovine cortical bone and pure synthetic hydroxyapatite. The material was then analyzed using simultaneous differential thermal analysis/thermogravimetric analysis (DTA/TGA), Fourier- Transform infrared spectroscopy (FTIR), and X-ray diffraction analysis (XRD). Imaging of full bone samples was also conducted using an environmental scanning electron microscopy (ESEM). The SEM provided valuable information through the imaging of samples, showing a markedincrease in bone porosity for crocodile material when compared to bovine samples. The crystallinity and/or crystallite size of carbonated hydroxyapatite has been found to be lower than synthetic apatite, with the tibia being the least crystalline of the bone types studied. The crystallinity index (CI) is used as a measure of crystallite size and internal strain. The strain is affected by substitutions in the structure and these results provide a starting point for comparison of the resulting mechanical properties. There is a need for any biomaterial chosen for bone replacement to allow adequate osteointegration. Thus the study this far shows that crocodile bone is a very promising source of carbonated apatite for biomedical applications.
Authors: Artemis Stamboulis, Robert G. Hill, Robert V. Law, Shigeki Matsuya
Authors: F. Dabbarh, A. Rodrigues El Zein, C. Chaput
Authors: Sergey V. Dorozhkin, Elena I. Dorozhkina, Faik N. Oktar, S. Salman
Abstract: A simplified preparation method of silicon-substituted calcium phosphates with a very high yield (close to 100%) has been elaborated, according to the principles of Green Chemistry. The technique consists of mixing of crystals of calcium nitrate and ammonium dihydrogen phosphate in the desired proportions, following by addition of the necessary amount of a silicon-containing compound. The homogenous mixture is sintered between 900 and 1200°C. Either a siliconcontaining hydroxyapatite (Si-HA) or a silicon-stabilized tricalcium phosphate (Si-αTCP) can be synthesized, depending on the Ca/P, Ca/(P+Si) and Si/P molar ratios.
Authors: Zhu Ju Wang, Wen Bo Han, Shu Qing Tao, Ying Wu
Abstract: Over the last 100 years innovative techniques in the fabrication of ceramics have led to their use as high-tech materials. Inert bioceramics, such as ZrO2, have inherently low level of reactivity compared with other materials such as polymers and metals as well as surface reactive or resorbable ceramics. The aim of this study was to validate the effect of incision using a zirconia inert bioceramic scalpel to incise animal body and to prove incision property of tissues before clinic. The experiments of incisions concrescence using a sterilized Zirconia inert bioceramic scalpel were investigated in this paper. We used 4-month-old inbred line SD rats as experiment animals. They were divided into three groups to undergo incision on the back skin and subcutaneous tissue. The subcutaneous tissue and musculature samples were obtained and analyzed by optical microscopy at 3, 7 and 14 days for histopathological evaluation respectively. The experimental results showed that no wound dehiscence was observed after suture removal at 14 days after the operation. The experiments proved that an inert bioceramic scapel was nontoxic, nonallergenic, and noncarcinogenic for incisions that obtained normal concrescence criteria two weeks after operation.
Authors: Man Tae Kim, Hyup Jae Chung, Gyu Seok Choi, Yong Bae Kim, Kyong Yop Rhee
Abstract: In this study, heat-acupuncture needle was coated with bioceramics by applying a plasma spray coating method to prevent a skin burn in the heat-acupuncture therapy. The effect of coating on the surface roughness of heat-acupuncture needle was investigated and the surface morphology was examined by scanning electron microscope (SEM). The effect of coating on the heat conduction of heat-acupuncture needle was also investigated. The results showed that the surface roughness of uncoated, Al2O3, and ZrO2 coated needle was 0.0675um, 8.568um, and 3.285um, respectively. The surface of ZrO2 coated needle was more uniform than that of Al2O3 coated needle. The results also showed that the heat conduction of heat-acupuncture needle was significantly affected by the bioceramic coating on the needle. Specifically, the maximum temperature of middle part of uncoated, Al2O3, and ZrO2 coated needle was 48°C, 38°C and 42°C, respectively.
Authors: Su Yeun Na, Min Hee Chung, Jong Ryeul Sohn, Jin Chul Park
Abstract: 1) Upon comparing Ceramic products, which have been made into samples by the exactly same construction method as prefabbed wall of apartment, with the existing products, it is revealed that there would beno diminution effect on Pollutants like TVOC and HCHO. On the contrary, from the Ceramic applied prefab-wall, some pollutants, which were not seen from normal wall-panel, had been emitted additionally. 2) When we spreaded seven kinds of catalyst products on the surface of samples of MDF furniture and tested, two of those applied samples showed stronger tendency regarding the TVOC and HCHO emission than unapplied samples. Consequently, it is clarified that there's no effect of eliminating the pollutants like TVOC and HCHO from the application of catalysts as well as ceramic. In this regard, when we consider all the results collectively which were earned from these analysises up to now, using indiscreet after-treatment materials in residential place should be applied only after prudent examination.
Showing 1 to 10 of 205 Paper Titles