Papers by Keyword: Hot Isostatic Pressing (HIP)

Paper TitlePage

Authors: Ying Gao, Dei Gui Zhu, Ling Cheng, Hong Liang Sun, Qing Wang
Abstract: Particles reinforced Al-xwt.%Si-Al2O3 (x=10,20) composites are fabricated through in situ reaction sintering of Al and SiO2 powder by hot isostatic pressing. Outgassing process and the microstructure of composites under different sintering processes are studied.XRD analysis confirms that the best hot outgassing temperature is 500°C,in situ reaction achieves completely and samples A2 and B2 have better microstructure at 550°C then heating-up to 700°C only for 1h.The microstructure analysis indicates that the reinforcement particulates distribute uniformly in the aluminum matrix.The mechanical properties test results show that the tensile strength of A2 is higher than B2. when x=10,the Al-Si-Al2O3 composites have better performance.
38
Authors: Shao Xing Wu, Yu Jun Ma, Yan Tie Xiang
Abstract: This article describes innovative and highly secure network architecture, dedicated to internet of things. We recommend that the infrastructure, there is a new label project, to support the upcoming launch of the standard Host Identity Protocol (HIP). Our main concern is to ensure the privacy of RFID tags, while enabling things to things communications.
135
Authors: Eric R. Vance, S. Moricca, Bruce D. Begg, M.W.A. Stewart, Y. Zhang, M.L. Carter
Abstract: Hot isostatic pressing (HIP) is a technology with wide applicability in consolidating calcined intermediate-level and high-level nuclear waste, especially with wastes that are not able to be readily processed by vitrification at reasonable waste loadings. The essential process steps during the HIP cycle will be outlined. We have demonstrated the effective consolidation via HIP technology of a wide variety of tailored glass-ceramic and ceramic waste forms, notably simulated ICPP waste calcines, I sorbed upon zeolite beads, Pu-bearing wastes, inactive Cs/Sr/Rb/Ba mixtures, simulated waste pyroprocessing salts from spent nuclear fuel recycling, Tc, U-rich isotope production waste, and simulated K-basin (Hanford, WA, USA) and Magnox sludges (UK). Can-ceramic interactions have been carefully studied. The principal advantages of the HIP technology include: negligible offgas during the high temperature consolidation step, relatively small footprint, and high waste loadings. As a batch process, the wasteform chemistry can be readily adjusted on a given process line, to deliver wastes into different end states (e.g. direct HIP versus chemically tailored). This flexibility allows the treatment of multiple waste streams on the one process line.
130
Authors: Vitali F. Nesterenko, Sastry S. Indrakanti, Singh N. Brar, YaBei Gu
243
Authors: Arno Plankensteiner, Bernhard Tabernig
Abstract: The optimization of CFC/Cu-interfaces for plasma facing divertor components in thermo-nuclear fusion reactors is proposed and demonstrated via an integrative numerical-experimental approach mainly comprising a macro-scale to micro-scale finite element modeling technique together with fracture mechanics tests. Results obtained by finite element analyses of real-scale CFC flat tile divertor components under high heat flux loading conditions are verified by the findings of tests in an ion beam high heat flux facility. From the macro-scale FE models of the full component the loading conditions are derived for micro-scale FE models that incorporate principal details of the micro-structured CFC/Cu-interface thus allowing to capture explicitly locally acting dissipative mechanisms which in turn at the macro-scale in fracture mechanics experiments increase the fracture toughness of the CFC/Cu-interface.
31
Authors: Satoru Ishihara, Toshiyuki Nishimura, Joachim Bill, Fritz Aldinger, Fumihiro Wakai
Abstract: Consolidation of pyrolyzed powders has been tried by hot isostatic pressing (HIP) without sintering additives, in order to obtain dense non-oxide ceramic bulk materials derived from polymer precursors. Si1.0C1.6N1.3 ceramic powders were derived from a polyvinylsilazane polymer. The polymer was thermally crosslinked at 250oC and pyrolyzed at 1050oC under Ar atmosphere. The pyrolyzed powders were die-pressed into rectangular bars at room temperature and densified by HIP at 1400oC-900 MPa and 1500oC-950 MPa. Dense ceramic monolith, in which pores were not observed by optical microscopy, was obtained by the HIP consolidation at 1500oC-950 MPa. The microstructure of the ceramic monolith was a nano-composite structure consisted of α-Si3N4 and graphite phases. In the compression tests of the HIP-treated sample, slight plastic deformation was observed at 1400 and 1500oC in spite of high compressive stress over 1000 MPa. On the other hand, the sample showed a compressive strain of about 7% at 1000 MPa at 1600oC. The compressive strain of about 11% was achieved at 1700oC.
15
Authors: Jenő Gubicza, Quang Hien Bui, F. Fellah, N. Szász, Guy Dirras
Abstract: Ultrafine-grained samples were consolidated from Ni nanopowders with the nominal particle size of 50 and 100 nm by Hot Isostatic Pressing (HIP) and Spark Plasma Sintering (SPS). The higher nickel-oxide content and the smaller grain size of SPS-processed samples result in a higher yield strength at room temperature compared with HIP-processed specimen. It is found that during compression the dislocation density increases while the twins decay in both samples, indicating that the deformation is mediated mainly by dislocations. As a consequence of the higher oxide content, the flow stress of the SPS-processed samples saturates at small strain values while the HIP-processed specimen shows strain hardening even at the strain value of 0.35. After saturation of the flow stress for SPS-processed samples the deformation is most probably mediated rather by grain rotation or grain boundary-related mechanisms such as sliding and/or decohesion instead of dislocation motion.
93
Authors: E. Fénard, Martine Desmaison-Brut, David J. Baxter
1165
Authors: G. Gualtieri, P. Calderoni, A. Ferruzzi, S. Gnudi, P. Frontali, F. Calista, I. Gualtieri
989
Showing 1 to 10 of 110 Paper Titles