Papers by Keyword: Shear Stress

Paper TitlePage

Authors: Tatiana Gorkaya, Thomas Burlet, Dmitri A. Molodov, Günter Gottstein
Abstract: A novel set-up developed to continuously observe and measure stress driven grain boundary migration is presented. A commercially available tensile/compression SEM unit was utilized for in-situ observations of mechanically loaded samples at elevated temperatures up to 850°C by recording orientation contrast images of bicrystal surfaces. Two sample holders for application of a shear stress to the boundary in bicrystals of different geometry were designed and fabricated. The results of first measurements are presented.
Authors: Massimiliano Lucchesi, Barbara Pintucchi, Nicola Zani
Abstract: This paper deals with non linear elastic materials for which not all the stresses are admis-sible but only those which belong to the stress range, i.e. a closed and convex subset of the spaceof all symmetric tensors. The constitutive equation that has been formulated and explicitly solved issufficiently general to include, besides the so-called masonry-like materials, many others whose stressrange is obtained experimentally or is theoretically defined. The model, implemented into the finiteelement code MADY, has been used to analyze a masonry panel under a bi-directional monotonicallyincremental load and the obtained numerical results have been discussed.
Authors: Tukaram S. Sarkate
Abstract: Springs is defined as an elastic body that can reserve high level of potential energy, have various important role in industries. Helical spring is the most common element that has been used in car suspension system. Spring steel is low carbon alloy, medium carbon steel or high carbon steel with very high yield stress related to light vehicle suspension system. In this research paper AISI 9255, (containing 1.5%-1.8% silicon, 0.7%-1.0%manganese and 0.52%-.6% carbon) under the effect of a uniform loading has been studied. .The FE model of the helical spring has been generated in Pro-E Wildfire 5.0 software and imported in ANSYS-10 for finite element analysis, which are most popular CAE tools. Also finite element analysis has been compared with analytical solution for different loads under the same conditions to conclude.
Authors: Afaf Saai, Laurent Tabourot, Christophe Déprés, Herve Louche
Abstract: In this paper, we present a fundamental model of FCC single crystal behaviour at room temperature: this model includes kinematic work hardening derived from the elementary description of the collective dislocations density evolution during cyclic loading. This kinematic work hardening is then coupled with the isotropic work hardening mechanism. Using this original model, a simulation of a tensile test on a single crystal sample is carried out in the case of an initial crystal orientation that promotes single glide even at rather large strains. The evolution of resolved shear stresses on the primary and secondary slip systems are interpreted by means of the interaction between the evolution of isotropic and kinematic work hardening variables. The evolution of the model state-variables including applied resolved shear strain, dislocation densities, and critical shear stresses are represented as functions of the evolution of crystalline orientation during plastic deformation.
Authors: Ming Li
Abstract: A more exact general analytical formula of preditcting the magnetostrictive coefficient is derived for any aspect ratio based the deflection difference between the x and y directions. The curvatures are found by minimizing the total energy of the system, which taking into account shear strain energy. The in-plane stress distribution including shear stress for short specimen is also given by the ANSYS® finite element package to illustrate the role of shear strain in the deformation of magnetostrictive film-substrate system.
Authors: Yan Yang, Chang Hua Lin, Hui Li, Jing Zhou
Authors: Di Zheng, Feng Lu, Li Yong Hu, Yong Jie Shi
Abstract: In mechanical equipments or manufacturing processes, force control is definitely required to achieve desired performance or to ensure product quality. Aiming at this issue, this paper introduced an author-invented torque servo device that utilizes magnetorheological fluids (MRF) to provide a controllable torque. In the paper, the structure and working principle of the MRF-based torque servo device (MRT) were introduced, the constitutive model and the characteristics of the MRF were established and discussed. On the basis, the static and dynamic models of the MRT were both analytically and experimentally studied, and the control of the output torque of the MRT was demonstrated. As an example, the application of the MRT to the polishing of aspheric surfaces was presented in the end.
Authors: Ling Wang, Pu Rong Jia, Gui Qiong Jiao
Abstract: The tensile strength of carbon fiber reinforced resin matrix layer splice laminate was studied. Three specimens (M1.M2.M3) were cut from laminates with different joint location and the number of layer splice. Load schemes were performed and typical load-displacement curves of three specimens were recorded. The result shows that the joint location has seriously effect on the tensile strength and modulus of specimens. The tensile strength of M2 is obviously lower than that of M1 and M3. Furthermore finite element ABAQUS6.5 was also used to simulate the course of experimental test. The result shows that shear stress concentration occurs on the joint of model. The shear stress on the model M1 and M2 has the similar trend and concentrates in the middle of the joint area. And on the model of M3 the shear stress has a completely different trend from the M1 and M2 model. On the M2 the shear stress concentration is slightly higher than the other two. It indicates that the tensile strength of M2 is the lowest among the three models. So, the inter-laminar shear stress is the major factor leading tensile failure. The experimental tests are consistent with the finite element analysis.
Authors: Wilko C. Emmens, A.H. van den Boogaard
Abstract: This work investigates the relation between shear stress and plastic yield considering that a crystal can only deform in a limited set of directions. The shear stress in arbitrary directions is mapped for some cases showing relevant differences. Yield loci based on mean shear stress are constructed. The Tresca yield criterion can be improved by averaging the shear stress over directions near the direction of maximum shear stress. Yield criteria based on averaging over crystallographic direction show a clear influence of the actual orientation of these direction, notably in case of few crystallographic directions. The general finding is that the higher the isotropy of a material, the lower the plane strain factor. The shape of the yield loci is comparable to those derived by the Hershey criterion with exponents lower than 3.
Showing 1 to 10 of 134 Paper Titles