Paper Titles
Microstructure and Electrical Conductivity of Ni-YSZ Cermets Prepared by Combustion Synthesis Method
p.437
NiO-SDC Powder for Solid Oxide Fuel Cell Anode Applications by Buffer Solution Method
p.440
Preparation and Characterization of Sm1-xSrxCoO3 Ceramics by the Gelcasting Process
p.444
Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm2O3, Gd2O3, Eu2O3 and CeO2) for La2O3 in La
p.448
On the Sealing Materials for SOFC
p.452
Investigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion Batteries
p.455
Electrochemical Performance of Al2O3-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-Ion Batteries
p.459
Synthesis and Electrochemical Properties of a LiNi0.7Co0.3O1.9Cl0.1 Cathode Material for Lithium-Ion Battery
p.463
Improvement of the Electrochemical Performance of LiFePO4 Cathode Composite Material Using a In Situ Pyrolysis Carbon Synthesis Procedure
p.466

On the Sealing Materials for SOFC

Article Preview

Abstract:

Processing of sealing materials is a key technology in planar SOFC. In this paper, compositions of sealing materials were determined and then mixed and milled for 7~8 h. Glass materials were obtained by melt at 1300 ~ 1600°C and quenched in cold water. The powder materials were made by milling and screening. Properties of thermal expansion of sealing materials were on the same level to both electrolyte and interconnect. Experiments using 7 kinds of materials were carried respectively at 900°C and 1300°C. The most suitable sealing temperatures related to sealing materials were then determined. Thermal cycle experiments were carried and hermetical properties were tested by red-absorption. Microstructure were observed with SEM and it revealed that the prepared sealing materials joins well with YSZ but not so good with metal.

You might also be interested in these eBooks
High-Performance Ceramics IV View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 336-338)

Pages:

452-454

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.336-338.452

Citation:

Cite this paper

Online since:

April 2007

Authors:

Min Fang Han, Zhong Li Wang, Yu Qian Wang

Keywords:

Glas Ceramics, Sealing Material, Solid Oxide Fuel Cell (SOFC)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] M. Han, S. Peng: Materials and Fabrication of Solid Oxide Fuel Cell (Beijing: Science Press, 2004), p.188.

Google Scholar

[2] Z. Yang, W. Jeff , S. Meinhardt: Solid State Ionics Vol. 160 (2003), p.213.

Google Scholar

[3] K. Eichler, G. Solow: J. Europ. Ceram. Soc. Vol. 19 (1999), p.1101.

Google Scholar

[4] T. Yamamoto, H. Itoh, M. Mori, et al.: Denki Kagaku (Japanese) Vol. 64 (1996), p.575.

Google Scholar

[5] L. Gao: Applied Technology of Ceramics-Metal Sealing (Beijing: Chemical Industry Press, 2005), p.185.

Google Scholar

[6] M. Han, S, Peng: Mater. Sci. Technol. Vol. 12 (2004), p.29.

Google Scholar

[7] R. J. Brook (edited): Ceramics Process (Beijing: Science Press, 1999), p.256. Fig. 3 Microstructure of sample 297- S5-YSZ.

Google Scholar