Paper Titles
Determination of the Deposition Characteristics and Luminance Decay Mechanisms in OLED and their Implications in Reliability Assessment
p.1810
Reliability Estimation of Solder Joint Utilizing Thermal Fatigue Models
p.1816
The Assessment of Influence of the Design Factors on the Reliability of BGA Solder Joints
p.1822
Reliability Analysis of ACF Interconnection Assembly Process Using FEM
p.1828
Stress Corrosion Cracking Life Estimation of Hold-Down Spring Screw for Nuclear Fuel Assembly
p.1834
Proposal of New Biaxial Fatigue Life Prediction Parameter by Using the Effective Shear Stress for CF8M Stainless Steels
p.1840
Very Long Life Fatigue Behavior of Bearing Steel AISI 52100
p.1846
Failure Analysis of Heterogeneous Microstructures in Ti-6Al-4V Alloy Using Probability Functions
p.1852
Creep Life Evaluation by Micro-Cavities
p.1858

Stress Corrosion Cracking Life Estimation of Hold-Down Spring Screw for Nuclear Fuel Assembly

Article Preview

Abstract:

Hold-down spring screw fractures due to primary water stress corrosion cracking were observed in nuclear fuel assemblies. The screw fastens hold-down springs that are required to maintain the nuclear fuel assembly in contact with upper core plate and permit thermal and irradiation-induced length changes. In order to investigate the primary causes of the screw fractures, the finite element stress analysis and fracture mechanics analysis were performed on the hold-down spring assembly. The elastic-plastic finite element analysis showed that the local stresses at the critical regions of head-shank fillet and thread root significantly exceeded the yield strength of the screw material, resulting in local plastic deformation. Preloading on the screw applied for tightening had beneficial effects on the screw strength by reducing the stress level at the critical regions, compared to the screw without preload. Calculated deflections and strains at the hold-down springs using the finite element analysis were in very close agreements with the experimentally measured deflections and strains. Primary water stress corrosion cracking (PWSCC) life of the Inconel 600 screw was predicted by integrating the Scott’s model and resulted in a life of 1.42years, which was fairly close to the field experience. Cracks were expected to originate at the threaded region of the screw and propagated to the opposite side of the spring, which was confirmed by the fractographic analysis of the fractured screws.

You might also be interested in these eBooks
Advances in Fracture and Strength View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 297-300)

Pages:

1834-1839

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.297-300.1834

Citation:

Cite this paper

Online since:

November 2005

Authors:

Seung Kee Koh

Keywords:

Failure Analysis, Hold-Down Spring Screw, Life Prediction, Preload, Primary Water Stress Corrosion Cracking

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2005 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] W.S. Ryu: Top Nozzle Holddown Spring Screw Fracture Cause (KAERI/CR-118/2001, 2001).

Google Scholar

[2] J.E. Shigley and L.D. Mitchell: Mechanical Engineering Design (McGraw-Hill, New York, 1983).

Google Scholar

[3] ABAQUS User's Manual, Ver. 6. 4 (Hibbit, Karlsson & Sorensen, Inc, Pawtucket, 2004).

Google Scholar

[4] P.M. Scott: Proceedings of Specialist Meeting on Operating Experience with Steam Generator, Brussel, Belgium (1991), p.5.

Google Scholar

[5] R.B. Rebak and Z. Smialowska: Corrosion Vol. 50 No. 5 (1994), p.378.

Google Scholar

[6] D.M. Oster and W.J. Mills: Structural Integrity of Fasteners, ASTM STP 1391, American Society for Testing and Materials (2000), p.85.

Google Scholar

[7] L.A. James and W.J. Mills: Engineering Fracture Mechanics Vol. 30 No. 5 (1988), p.641.

Google Scholar