p.21
p.25
p.31
p.37
p.43
p.47
p.51
p.55
p.59
Formation of Aluminum Nitride Film for High Power Soft X-Ray Source Using Ion-Beam Assisted Deposition Method
Abstract:
An aluminum nitride (AlN) target for Al-Kα X-ray source with high power and long service life has been developed by N2 + ions assisted Al vapor deposition method (IBAD). The AlN film formations were carried out at the Al deposition rate varied from 2.0 nm/s to 0.15 nm/s with a fixed low-energy N2 + ion of 1 keV. The films were deposited on Cu substrate at room temperature. The AlN films were characterized by an X-ray diffraction, an electron probe X-ray microanalysis and a Knoop-hardness measurement. The AlN deposited at the Al deposition rate of 0.5 nm has a N/Al ratio of 0.4, a Knoop-hardness of ~1500 and a low resistance of ~0.2 . Comparison of durability test between the AlN target and a conventional Al target was performed. It has been revealed, after 500 hours under an electron bombardment of 300 mA at 20 kV, that there were no change of morphology and X-ray intensity on the AlN-surface whilst cracks due to the heat-cycle fatigue covered the Al-surface.
Info:
Periodical:
Pages:
43-46
DOI:
Citation:
Online since:
October 2005
Price:
Сopyright:
© 2005 Trans Tech Publications Ltd. All Rights Reserved
Share:
Citation: