Paper Titles
Direct Tensile Tests of Individual WS2 Nanotubes
p.4097
Influence of Baushinger Effect on Yield Strength after Pipe Forming
p.4103
Effect of Inhomogeneity of Carbide Precipitation on Nanohardness Distribution for Martensitic Steels
p.4109
Evaluation of Grain Boundary Effect on the Strength of Fe-C Martensitic Steels through Nanoindentation Technique
p.4113
Ultrasonic Evaluation of Cyclically Deformed Microstructures of Cu and Cu-35Zn Alloy
p.4117
Effects of Hydrogen on Tensile Properties of SA508 Cl.3 Reactor Pressure Vessel Steel at High Temperature
p.4121
Effects of Microstructure on the Fatigue Resistance of Steel Tire Cords
p.4125
Water Vapor Oxidation Behavior under High-Temperature and Pressure Conditions of the Nitrided Alloys for Steam Turbine Valve System Parts
p.4129
High-Temperature Wear Properties of the Nitrided Alloys for Steam Turbine Valve System Parts
p.4133

Ultrasonic Evaluation of Cyclically Deformed Microstructures of Cu and Cu-35Zn Alloy

Article Preview

Abstract:

Ultrasonic nondestructive evaluation (NDE) technique has been applied to investigate the cyclically deformed microstructures of a Cu and Cu-35Zn alloy. These materials, which had different stacking fault energies, were cyclically deformed in order to examine the ultrasonic reaction with different dislocation substructures. The observation of a dislocation structure using TEM and the measurement of the ultrasonic NDE parameters were performed after various fatigue deformation in order to clarify the relationship between them. The ultrasonic velocity was observed to decrease with increasing fatigue life fraction in both materials, which was attributed to the increasing dislocation density, resulted from the cyclic deformation. The increasing rate of ultrasonic attenuation in Cu with a cell structure that evolved during cyclic deformation was higher than that in the Cu-35Zn alloy, which had a planar array. This suggests that the dislocation cell structure is more sensitive to the change in the ultrasonic parameters than the planar array structure formed during cyclic deformation.

You might also be interested in these eBooks
PRICM-5 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 475-479)

Pages:

4117-4120

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.475-479.4117

Citation:

Cite this paper

Online since:

January 2005

Authors:

C.S. Kim, S.I. Kwun

Keywords:

Attenuation, Dislocation Structure, Microstructure, Ultrasonic Velocity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2005 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] Z. G. Wang, L. J. Chen, J. F. Tian and G. Yao: Met. Mater. Int. Vol. 5 (1999), p.597.

Google Scholar

[2] S. W. Han, U. J. Lee and S. W. Kim: Met. Mater. Int. Vol. 8 (2002), p.443.

Google Scholar

[3] V. E. Iordachea, F. Ossartb and E. Huga: J. Magn. Magn. Mater. Vol. 254-255 (2003), p.57.

Google Scholar

[4] M. G. Glavicic, A. A. Salem and S. L. Semiatin: Acta Mater. Vol. 52 (2004), p.647.

Google Scholar

[5] A. Barbieri, S. Hansen, A. Llzhöfer and U. Holzwarth: Appl. Phys. Lett. Vol. 77 (2000), p. (1911).

Google Scholar

[6] Y. Madhoun, A. Mohamed and M. N. Bassim: Mater. Sci. Eng. Vol. A359 (2003), p.220.

Google Scholar

[7] C. E. Feltner and C. Laird: Acta Metall. Vol. 15 (1967), p.1633.

Google Scholar

[8] P. Lukas and M. Klesnil: Mater. Sci. Eng. Vol. 11 (1973), p.345.

Google Scholar

[9] S. I. Kwun, S. T. Hong and W. Y. Choo: J. Mater. Sci. Lett. Vol. 19 (2000), p.1453.

Google Scholar

[10] R. Truell, C. Elbaum and B. B. Chick: Ultrasonic Methods in Solid State Physics (Academic Press, London 1969).

DOI: 10.1016/b978-1-4832-3318-5.50004-3

Google Scholar

[11] M. Hirao, H. Ogi, N. Suzuki and T. Ohtani: Acta Mater. Vol. 48 (2000), p.517.

Google Scholar

[12] A. Granato and K. Lűcke: J. Appl. Phys. Vol. 27 (1956).

Google Scholar