Large Scale Motor Group Integrative Management and Control Network System Based on PLC-SCADA under Complex Environment

Abstract:

Using advantages of PLC, SCADA, inverter, bus and internet in industrial production, in order to cope with the characteristics of large number of motor, complex sequential logical, high drive control demanding and distributed in different territory, it designs a configuration monitoring system for motor group integrative management and control network system, which uses PPI protocol and USS protocol and fieldbus technology, configuration monitoring technology and network technology, etc. It can realize the effective management of large number of motor driving and control. Due to its function quite similar, S7-200 and S7-300 and MM440 in the paper can be replaced by other kinds of PLC and inverter on the market. So the control scheme proposed by this paper is more practical and universal. Application in textile printing and dyeing institutions multi-cell motor driving, it shows that the designed system can drive and control the motor group with high efficiency and reliable.Keyword: large number of motor; motor group network; drive and control; inverter; PLC-SCADA.

• Periodical: Applied Mechanics and Materials (Volume 742)
• Pages: 698-707
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.742.698
• Online since: March 2015
• Authors: Li Ming Zhao*, Bing Zhang
• Keywords: Control, Drive, Inverter, Large Number of Motor, Motor Group Network, PLC-SCADA

References

[1] Phillip G. Lee, Process control and artificial intelligence software for aquaculture, Aquacultural Engineering, vol. 23, 2000, p.13–36.

DOI: 10.1016/s0144-8609(00)00044-3

[2] P. Hosek, M. Diblik, Implementation of Siemens Uss Protocol into Labview, Journal of Laboratory, vol. 16, 2011, pp.347-354.

DOI: 10.1016/j.jala.2009.07.008

[3] Musaria K. Mahmood, Fawzi M. Al-Naima, An Internet Based Distributed Control Systems: A Case Study of Oil Refineries, Energy and Power Engineering, vol. 3, 2011, pp.310-316.

DOI: 10.4236/epe.2011.33038

[4] John D. Fernandez, Andres E. Fernandez, SCADA systems: vulnerabilities and remediation, Journal of Computing Sciences in Colleges, vol. 20, 2005, pp.160-168.

[5] Mohamed Endi, Y. Z. Elhalwagy, Attalla Hashas, Three-Layer PLC/SCADA System Architecture in Process Automation and Data Monitoring, 2th International Conference on Computer and Automation Engineering, 2010, pp.774-779.

DOI: 10.1109/iccae.2010.5451799

[6] A. Lakshmi Sangeetha, B. Naveenkumar, A. Balaji Ganesh, et al., Experimental validation of PID based cascade control system through SCADA-PLC-OPC and internet architectures, Measurement, vol. 4, 2012, pp.643-649.

DOI: 10.1016/j.measurement.2012.01.005

[7] Zafer Aydogmus, Omur Aydogmus, A Web-Based Remote Access Laboratory Using SCADA, IEEE Transactions on Education, vol. 52, 2009, pp.126-132.

DOI: 10.1109/te.2008.921445

[8] Chee-Wooi Ten, Chen-Ching Liu, Govindarasu Manimaran, Vulnerability Assessment of Cybersecurity for SCADA Systems, IEEE Transactions on Power System, vol. 23, 2008, pp.1836-1846.

DOI: 10.1109/icsmc.2007.4414239

[9] Stamatis Karnouskos, Armando Walter Colombo, Architecting the next generation of service-based SCADA/DCS system of systems, 37th Annual Conference on IEEE Industrial Electronics Society, 2011, pp.359-364.

DOI: 10.1109/iecon.2011.6119279

[10] A. Carcano, A. Coletta, M. Guglielmi, et al., A Multidimensional Critical State Analysis for Detecting Intrusions in SCADA Systems, IEEE Transactions on Industrial Informatics, vol. 7, 2011, pp.179-186.

DOI: 10.1109/tii.2010.2099234

[11] Carlos Queiroz, Abdun Mahmood, Zahir Tari, SCADASim-A Framework for Building SCADA Simulations, IEEE Transactions on Smart Grid, vol. 2, 2011, pp.589-597.

DOI: 10.1109/tsg.2011.2162432

[12] Saurabh Amin, Xavier Litrico, S. Shankar Sastry, et al., Cyber Security of Water SCADA Systems-Part Ⅱ: Attack Detection Using Enhanced Hydrodynamic Models, IEEE Transactions on Control Systems Technology, vol. 5, pp.1679-1693.

DOI: 10.1109/tcst.2012.2211874

[13] David C. Mazur, Rob A. Entzminger, John A. Kay, Enhancing Traditional Process SCADA and Historians for Industrial & Commercial Power Systems with Energy(Via IEC 61850), 50th IEEE Industrial & Commercial Power Systems Technical Conference, 2014, pp.1-7.

DOI: 10.1109/icps.2014.6839180

[14] Z. Vale, H. Morais, P. Faria, et al., Distributed Energy Resources Management with Cyber-Physical SCADA in the Context of Future Smart Grids, 15th IEEE Mediterranean Electrotechnical Conference, 2010, pp.431-436.

DOI: 10.1109/melcon.2010.5476239

[15] Wei Gao, Thomas Morris, Bradley Reaves, et al., On SCADA Control System Command and Response Injection and Intrusion Detection, eCrime Researchers Summit, 2010 IEEE, pp.1-9.

DOI: 10.1109/ecrime.2010.5706699

[16] Donghyun Choi, Sungjun Lee, Dongho Won, et al., Efficient Secure Group Communications for SCADA, IEEE Transactions on Power Delivery, vol. 25, 2010, pp.714-722.

DOI: 10.1109/tpwrd.2009.2036181

[17] Aamir M., Poncela J., Uqaili M. A., et al., Optimal Design of Remote Terminal Unit(RTU) for Wireless SCADA System for Energy Management, Wireless Pers Commun, vol. 3, 2013, pp.999-1012.

DOI: 10.1007/s11277-013-1060-9

[18] Saru Sehgal, Vikas Acharya, Effect of PLC and SCADA in Boosting the Working of Elevator System", Electrical and Computer Science, 2014 IEEE Students, Conference, 2014, pp.1-6.

DOI: 10.1109/sceecs.2014.6804480

[19] Iman Morsi, Loay Mohy EI-Din, SCADA system for oil refinery control, Measurement, vol. 47, 2014, pp.5-13.

DOI: 10.1016/j.measurement.2013.08.032

[20] David C. Mazur, John A. Kay CET, Kenneth D. Mazur, Intelligent Motor Control, a Definition and Value Add to Process Control, 2013 IEEE Industry Applications Society Annual Meeting, 2013, pp.1-7.

DOI: 10.1109/ias.2013.6682504

[21] Tsagaris, Apostolos, Optimal control of storage system based on intelligent techniques, Methods and Models in Automation and Robotics, 19th International Conference on, IEEE, 2014, pp.264-269.

DOI: 10.1109/mmar.2014.6957362