Papers by Author: A.N. Zhdanov

Abstract: The paper presents the results of the transmission electron microscopic (TEM) investigation of the structure and phase composition of nanocrystalline copper obtained by the severe plastic deformation using the high pressure torsion (HPT) method. Special attention is paid to the triple junctions of grain boundaries. It was established that the triple junctions contained the partial disclinations and particles of the secondary phases. The dependences of such junction fractions on the deformation were measured of the formation at nanocrystalline copper. The phase analyses of the secondary phase structure were carried out, the sizes of the phase particles and their volume fractions were determined. The bending – torsion of the crystal lattice arising near the triple junctions was measured. The problem of the long – range stress field screening was considered.

Abstract: The present work is devoted to the investigation of the influence of the grain size on the main mechanical characteristics of nanopolycrystals of different metals. The Hall-Petch parameter behaviour for Al, Cu, Ni, Ti and Fe was examined in the wide grain size interval. The stages of plastic deformation and the parameters of work hardening for nanocrystalline copper were analysed in detail. The deformation mechanisms and critical grain sizes accounting for the transition from the dislocation slip to the grain boundary sliding were described.