Papers by Author: Arnaud Mantoux

Abstract: Core–shell Si/SiC nanostructures appear as promising building blocks for sensing applications, thanks to the high chemical stability of SiC coupled with the semiconducting properties of Si. In order to optimize the fabrication process of such structures, Si nanowires were coated with a thin SiC layer, and integrated as back-gated field-effet transistors. Two approaches for the fabrication of the SiC shell were then investigated. The first approach involves chemical vapor deposition of amorphous SiC on Si nanowires, without the need for masking; the second approach involves carbonization of Si surfaces to produce a thin crystalline SiC layer, but requires a larger thermal budget. The resulting structures were analyzed using high-resolution transmission electron microscopy (HR-TEM), and the devices were characterized electrically. Electrical characterization shows that the carbonization approach induces a dramatic decrease in drain-to-source current associated with gate leakage, whereas the electrical performances were preserved in the case of chemical deposition.

Abstract: Silicon nanowires obtained by a top-down approach have been carburized at high temperature and atmospheric pressure with two different gaseous precursors: CH4 and C3H8. These processes reveal core silicon / shell 3C-SiC nanowires. After being characterized by SEM, FIB-SEM and TEM microscopies, the 3C-SiC layer has been used as seed layer for the growth of epitaxial 3C-SiC on the nanowires. Preferential growth of 3C-SiC on the sidewalls of nanowires has been observed. Thanks to the biocompatibility of SiC compared to Si, this layer could act as a protective shell for biosensors based on Si nanowires transistor.

Abstract: Carburization of silicon nanowires (NWs), with diameters of about 800 nm and lengths of about 10 µm, under methane at high temperature in order to obtain silicon carbide (SiC) nanostructures is reported here. The produced SiC nanostructures display a tubular shape and are polycrystalline. The as-prepared silicon carbide nanotubes (NTs) were characterized and studied by scanning electron microscopy (SEM), dual focused ion beam – scanning electron microscope (FIB-SEM), transmission electron microscopy (TEM) and Raman spectroscopy. The formation of nanotubes can be explained by the out-diffusion of Si through the SiC during the carburization process.

Abstract: Silicon microwires (MWs) previously synthesized using the VLS method with gold catalyst are being carburized at 1100°C under methane aiming to their conversion to SiC. SEM, TEM as well as XPS and Raman spectroscopy were used for structural and morphological characterization. After carburization achievement, SiC is found to be polycrystalline with a high density of stacking faults associated to an increase of surface roughness. Directions for the carburization process optimization are given.