Papers by Author: Gui Zhen Fang

Abstract: In this article, L-ascorbic acid cellulose ester, a polymer with antioxidant properties, was synthesized using L-ascorbic acid and sodium carboxymethyl cellulose as feedstock. The whole reaction was divided into two parts: the preparation of carboxymethyl cellulose carbonyl chlorides and the synthesis of L-ascorbic acid cellulose ester. The optimal conditions of acyl chloride preparation: ratio (m/v) of CMCH to SOCl₂ was 1:3, proportion (m/v) of CMCH to DMF was 1:20, reaction temperature was 110-120°C, reaction time was 2h. The optimal conditions of L-ascorbic acid cellulose ester synthesis: ratio (m/v) of L-ascorbic acid to solvent was 1:3.5, proportion (Mol/Mol) of Carboxymethyl cellulose carbonyl chlorides to L-ascorbic acid was 1:1.3, reaction temperature was 20°C, reaction time was 22h. In this reaction conditions, the synthetic product not only saved the antioxidant activity of the groups, and added the safe and non-toxic ability of dietary fiber.

Abstract: We introduced the oxidation method of Lecithin liposome which induced by Fe²⁺ and fluorescence chemiluminescence method. The method used to determine the ability of the proanthocyanidin extracted from Sanguisorba of inhibit liposome peroxidation, scavenge superoxide anion(O₂－.) and hydroxyl free radical(·OH). We carried out a comparative analysis with rutin, extract of Grape Seed and vitamin E (V_E) in antioxidant ability. As revealed in the results, compared the extract of Grape Seeds and V_E, the inhibition ratio of proanthocyanidin extracted from Sanguisorba to inhibit liposome peroxidation is 1.62 and 7 times, scavenge superoxide anion (0₂－.) is 1.6 and 10.15 times and scavenge hydroxyl free radical（.OH）is 1.9 and 29.5 times, respectively. The results demonstrate that proanthocyanidin extracted from Sanguisorba show better antioxidant ability, which further revealed that resource of sanguisorba is more worth exploiting and applying.

Abstract: Dialdehyde oxycellulose-coated magnetite nanoparticles were prepared as carrier to immobilize the lactase, the preparation conditions and enzymatic properties of the immobilized enzyme were studied. The results showed that the maximum activity of immobilized enzyme is 0.424U/g when immobilized time is 4h, immobilized pH is 6.5, [enzyme]/[carrier] =1:15(g:g). Compared with free enzyme, the heat stability and basic resistance of immobilized lactase were increased. After reuse five times, the relative enzyme activity of immobilized enzyme was 63%.

Abstract: In this paper, Chinese larch bark and different areas of Korean larch bark chemical composition and quantitative analysis of active ingredients, and with several plant resources in the total flavonoids were compared and evaluated. The results showed that: Korean larch bark of ash content (1.34%) lower, phenethyl alcohol extract (16.17%), proanthocyanidins (3.84%), total flavonoids(16.59%) and dihydro-quercetin (4.87% ) the highest. The total flavonoid content is more higher than the development of herbal extracts of total flavonoids. Therefore, the bark is a great potential for development of renewable resources.

Abstract: Waterborne preservative of DDAC and boride are used to impregnate P. ussuriensis Kom lumbers by roller compression under compression rates ranging from 10 percent to 50 percent. Results showed that the cranny in intervascular pit membranes appeared, and the cell wall of vessel element and fiber segment displayed drape and cranny due to roller compression. With the rise of compression rate, both the penetration depth of preservative and the retention quantity of preservative in the experimental lumber increased, while the mass loss rate decreased.The penetration depth perpendicular to the grain was more than 3.9 mm, while that parallel to the grain of wood was more than 20 mm when the compression rate was greater than or equal to 30 percent. Under the compression rate of 30 percent, the retention quantity of preservative in the experimental lumber impregnated with DDAC (thickness of 1 percent) was 8.743 kg/m3 and the mass loss rate was 14.36 percent, while those with boride (thickness of 2 percent) are 3.322kg/m3 and 9.92 percent.

Abstract: In this paper, the hydrophobic nano-calcium carbonate (CaCO3) was prepared by organic matter (the bolaform surfactant Disodium Sulfodehydroabietate as template) modifying surface structure of calcium carbonate (made by anhydrous sodium carbonate and anhydrous calcium chloride) at 40°C for 2h. The prepared hydrophobic nano-CaCO3 was characterized by means of Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Transmission electron microscope (TEM) and. The nano-CaCO3 with mean particle size of 64.4 nm was obtained in the range of 0.5~1.5µm by calculation. The contact angle of nano-CaCO3 with liquid solid was 117.49°. The hydrophobic property become stronger.

Abstract: Ether of carboxymethylcellulose-based picric acid(CMC-PA) was prepared from carboxymethylcellulose(CMC) and picric acid(PA) by the mild reactive conditions of acidylation with chloric.The strcture of CMC-PA was characterized by FTIR,Element analysis,XRD and CPMAS13C NMR.Influences of reaction conditions,such as reaction temperature,reaction time,ratio of CMC to PA and amount of pyridine,were studied by mass fraction of nitrogen.Result showed that the synthetical conditions were obtained as ratio of CMC to PA 2 : 1 (by weight),amount of pyridine 50 mL,reaction temperature 85°C and reaction time 4 hours.The adsorption property of CMC-PA to creatinine was studied under simulated biological human body conditons.The kinetic and isothermal curve were given. Results showed that adsorption amount reached an equilibrium value after 10 hours,and the maximum adsorption amount was 1.75mg/g.Equilibrium data of creatinine fit well with Freundich equation,indicating that the adsorption was mainly chemical monolayer adsorption .The Freundich indx(1/n) was less than 1,which implied that the adsorption was preferential process.

Abstract: The research synthesized bis-(2-methyl quinoline) squarylium cyanine (abbr. QYCD). It was used as dye to enhance the photocatalytic activity of nano-TiO2 in sunlight. Then the photocatalytic process of removal of benzene was investigated indoor air. Results reveal that bis-(2-methyl quinoline)- squarylium cyanine has an intense absorption in the light region of 200nm - 800 nm. The Benzene removal of QYCD-nano-TiO2 complex catalyst at 78h was 97.69%, at the same time it was 36.96% higher as compared with that of nano-TiO2.

Abstract: N-(3-dehydroabietyloxy-2-hydroxy) propyl-N, N-dimethyl (2-hydroxy) phosphate betaine was synthesized through the 3-dehydroabietyloxy-2-hydroxypropyl chloride and tertiary amine intermediate by using dehydroabietic acid as raw materials. The structure of the target product was confirmed by FT-IR, 1H NMR. The surface-active property was investigated by surface tension experiment. The surface activity of the mixed system of the product and sodium dodecyl sulphate (SDS) was determined. The results showed that critical micelle concentration (CMC) of the product was 1.34 mmol•L-1. Strong synergism in product was observed combining with SDS, and the optimum synergism was obtained at the molar ratio of 1:1.

Abstract: Cationic surfactant, quaternary ammonium salt of lignin, was synthesis from the lignin and trimethylamine though Mannich Reaction. Then quaternary ammonium salt of lignin was used as a novel template to prepare nanostructural silica from TEOS by sol-gel templating method. After removing the template at 580°C, nanostructural silica were obtained. The results of SEM and TEM show that there were two kinds of the silica after calcined. One is 3-dimetional macroporous silica, with the pore size of 100-200 nm. The other kind of silica is nanoparticle: the particle sizes range from 20 to 200nm and the specific surface area is 387.6 m2•g-1.