Papers by Author: Peggy Y. Hou

Abstract: The “reactive element effect”, modified from its earlier representation of the “rare earth effect”, is a well known term within the oxidation community. It describes several beneficial outcomes on the oxidation behavior of alumina and chromia forming alloys. Any element can be considered “reactive” if it is more oxygen active than the scale forming element, namely that of Al or Cr. However, the relative effectiveness of each element can be quite different. Numerous scientific studies have been carried out on this topic since its discovery more than 70 years ago to gain understanding of the manifestations of and reasons for these effects. This paper gives an overview that summarizes current understandings on this effect and points to issues that warrant further studies.

Abstract: The electronic properties of chromia scales grown between 800°C and 900°C on chromium metal and chromia-forming ferritic stainless steels were determined using room temperature PhotoElectroChemistry (PEC) experiments and the relative importance of the n- and p-character of the scales could be assessed. According to the thermodynamic previsions of defects structures, the external part of all the scales grown in oxygen exhibits band gap energy around 3.5 eV, with a marked p-type character on chromium and a possibly n-type behaviour on stainless steels. On the contrary, the internal part of the scales is always n-type, with predominant interstitial chromium defects. A major change appears when chromium or stainless steels are oxidised in water vapour-argon mixtures, where the absence of a p‑type semiconductor in the scales could be evidenced. Hydrogen defects are thought to be responsible of this particular behaviour which leads to a strong reduction of residual stresses due to increased high temperature relaxation. Moreover, the inversion of the growth direction resulting from high mobility of the OH defects makes the chromia scales grown in water vapour more adherent than when grown in oxygen.

Abstract: Strains in thermally grown oxides have been measured in-situ, as the oxides develop and evolve. Extensive data have been acquired from oxides grown in air at elevated temperatures on different model alloys that form Al2O3. Using synchrotron x-rays at the Advanced Photon Source (Beamline 12BM, Argonne National Laboratory), Debye-Scherrer diffraction patterns from the oxidizing specimen were recorded every 5 minutes during oxidation and subsequent cooling. The diffraction patterns were analyzed to determine strains in the oxides, as well as phase changes and the degree of texture. To study a specimen's response to stress perturbation, the oxidizing temperature was quickly cooled from 1100 to 950oC to impose a compressive thermal stress in the scale. This paper describes this new experimental approach and gives examples from oxidized β-NiAl, Fe-20Cr-10Al, Fe-28Al-5Cr and H2- annealed Fe-28Al-5Cr (all at. %) alloys to illustrate some current understanding of the development and relaxation of growth stresses in Al2O3.