Papers by Author: Shu Hui Wang

Abstract: A series of experiment were performed to test the cleaning ability of different organic emulsion for Si₃N₄ ceramic grinding. The experiment results showed that the grinding fluid made by short chain organic substance and alkane will induces the jam of grinding wheels. At the same time, polar organic substance with long carbon chain can suppress wheel loading phenomenon. The main reason of the jam by alkane is the nonpolar oil film surface possesses the strong attraction to abrasive dust of Si₃N₄, which will lead to jam in the grinding process. The polar oil film relieves the aggregation of abrasive dust in the grinding area to some extant, which is beneficial to decrease jam. By analyzing the cleaning property by some types of polar organic substances, the paper discusses the relationships of molecular structure characters to their cleaning ability.

Abstract: High performance cemented carbide YG610 was adopted for remanufacture hardness deposited materials cutting experiment. The experiment results showed that the same conclusions can be drawn from two group orthogonal experiments. The influence order on cutting capability of cutting tools was: feed rate﹥cutting speed﹥ cutting depth. The cutting length of cutting tools increases monotonously with the feed rate decrease. And the effects by the cutting depth were comparatively small, which is almost negligible in hardness materials cutting. Therefore，low feed rate and large depth of cut are beneficial to keep cutting capability of cutting tools and improve manufacturing productivity. By the results of two orthogonal experiments and extreme deviation analysis, the optimal scheme for cutting parameters were achieved after calculating the best level of the factor.

Abstract: A series of experiment were performed to test the cleaning ability of different alkane emulsion for Si3N4 ceramic grinding. The experiment results showed that the adsorption film surface of nonpolar alkane have strong attraction to Si3N4 abrasive dust, which will make abrasive dust to gather at the grinding area and finally led to jam. To add alkane grinding fluid with polar organic substances is beneficial to decrease jam. The best additive for anti block is which integrate hydrophobic group and hydrophilic group, both are indispensable.

Abstract: A series of experiment were performed to test the tribological properties of Si3N4 ceramic pair lubricated by emulsions of alkane. The experiment results showed that all alkane are very efficient lubricator for Si3N4 ceramic pair. The straight chain alkanes can perform better than branched paraffin or polycyclic saturated hydrocarbon. When added the liquid paraffin with chlorinated paraffin or Oleic acid, the lubrication property become poor. But added with silicone oil emulsion，the lubrication improve further. Base on the molecular structure of reagents, the causative mechanisms is investigated.