Papers by Author: Wei Dong

Abstract: Large amount of nitrogen addition into an austenitic stainless steel can improve the mechanical properties and corrosion resistance remarkably as far as the nitrogen is in solid solution. However, once the nitrogen precipitates as nitride, it results in deteriorations in the properties of the high nitrogen austenitic stain steel. During welding, a high nitrogen austenitic stainless steel is ready to precipitate rapidly immense amounts of chromium nitride in the heat affected zone (HAZ), as intergranular or cellular morphologies at or from grain boundaries into grain interiors. The nitride precipitation reduces seriously the local mechanical properties and corrosion resistance. The present authors have demonstrated that a thermomechanical-processing as grain boundary engineering (GBE) inhibited intergranular chromium carbide precipitation in the HAZ of a type 304 austenitic stainless steel during welding and improved the intergranular corrosion resistance drastically. In the present study, the thermomechanical-processing was applied to a high nitrogen austenitic stainless steel containing 1 mass% nitrogen to suppress the nitride precipitation at or from grain boundaries in the HAZ during welding by GBE. GBE increases the frequency of coincidence site lattice (CSL) boundaries in the material so as to improve the intergranular properties, because of strong resistance of CSL boundaries to intergranular deteriorations. The optimum parameters in the thermomechanical-processing brought a very high frequency of CSL boundaries in the high nitrogen austenitic stainless steel. The GBE suppressed the intergranular and cellular nitride precipitation in the HAZ of the high nitrogen austenitic stainless steel during welding.

Abstract: Mono-sized silicon particles were effectively fabricated by a novel way named pulsated orifice ejection method (POEM). The particles are with very narrow particles size distribution and very small standard deviation of mean particle size. There are two different types spherical silicon particles were found. One consists of many grains mainly in random boundaries. The other consists of two or three grains with only twin orientation relationships, even single crystal in cross-section was also found within this type spherical silicon particles.

Abstract: Monosized germanium micro particles are prepared by a newly developed Pulsated Orifice Ejection Method (POEM). The obtained particles are categorized into two kinds of the microstructures as refined and coarse ones. The morphological difference is estimated to be determined by the undercooling level during nucleation. Actually, the increase in the temperature of the melt was effective in coarsening the microstructure, because the temperature of the melt intensely relates to the undercooling level. The transition temperature of coarse and refined microstructures is found to be 1300-1350K. Furthermore, a triggered nucleation could improve the crystallinity of the particles in the short separation.