Papers by Author: Xiu Yun Sun

Abstract: The chemically activated method has been applied to prepare activated carbon from the incinerated medical waste. The preparation process of activated carbon was investigated under various conditions set by several factors, including the type of active agent used, the ratio of active agent and carbonized product, the activation temperature, the dwell time and heating rate. The results demonstrated KOH had shown the best performance as the active agent. The optimal preparation conditions could be described as follows: ratio of KOH and carbonized product 3:1, heating rate 5 °C/min, activation temperature 800 °C with activation time 1 hour. The activated carbon prepared under the optimal preparation conditions showed good adsorption performance. The adsorption capacities for methylene blue and iodine were 24~28 ml/0.1g and 965~1150 mg/g, respectively. BET surface area of activated carbon obtained was as high as 985.1634~1387.4586 m²/g. The activated carbon prepared from medical waste exhibited excellent characteristics of sorbent.

Abstract: Recalcitrant and toxic organic pollutants such as aniline from numerous industrial wastewaters can not be efficiently removed using the conventional methods. This study reported a concept for mineralization of aniline in an anoxic reactor, where enhanced biodegradation of aniline were achieved under anoxic conditions. The results indicated that with the presence of nitrate, the degradation rate of aniline was greatly improved compared with the absence of nitrate. From the UV-vis adsorption spectra, COD analysis and denitrification performance analysis, it could be inferred that the cleavage of benzene ring of aniline occurred, aniline could be mineralization by microorganisms under the anoxic condition. However, aniline removal rate was lower compared to aerobic degradation process, and thus needs a significant improvement.