Papers by Author: Y.J. Li

Abstract: Precision metal sieve-sheets are one of the key components of several high-tech products. Fabrication of the precision sieve-sheets possessing high open area percentage, large thickness and good quality simultaneously has always been a tickler in micro-machining area. In this paper, aiming to manufacture micro-sieves with open areas of about 90% and good quality, micro-electroforming was taken as a major process means, and the technical points and technical difficulties of some key process steps in the preparation of micro-precision sieves were explored emphatically. Meanwhile, operational conditions were optimized and major technological parameters were selected optimally. Using the optimal conditions as well as the optimum parameters, two specifications of hexagon micromesh sieve-sheets whose side length, open-area percent and sheet-thickness was 210μm, 88%, (120±3)μm and 520μm, 92%, (100±2)μm, respectively, were successfully obtained. The electroformed sieves are characterized by flat and smooth surfaces of aperture walls, sharp edge definition, rigid and homogeneous structures and well-distributed mesh.

Abstract: This paper presents the research on calibration for a 6-component huge force sensor. 6-component huge force sensor is used to measure the loading forces Fx, Fy, Fz and moments Mx, My, Mz. Static calibration equipment is studied. In order to express the relationship between input force signal and output electric signal when the sensor is used, a coupling matrix is needed. In this paper, a method for establishing the coupling matrix is developed. The matrix is used to calculate the input signal when sensor works in the simulation application, and the result shows it serves the sensor well.