Papers by Keyword: Brush

Abstract: We have shown how different micellar (SDBS) vs. polyelectrolytic (PSSA) supramolecular assemblies in post-CMP cleaning solutions differ in their tribological performance when used in a novel PVA scrubber for 300-mm silicon dioxide wafer cleaning. Significant differences in real-time shear force and coefficient of friction data from the wafer-solution-brush interface (both in time domain as well as frequency domain) have been attributed to differences in each supramolecule’s chemical functionality and structure, which in turn, have been correlated to wafer-level defects. The work has underscored the importance of measuring the tribological attributes of post-CMP cleaning processes in an effort to improve cleaning performance.

Abstract: The mathematical description of the wear processes of brushes of brush-type motors is described. The actions directed on increase of the lifetime of brushes are offered. The proposed mathematical model of the wear processes of brushes considers the highest number of parameters of a sliding contact, including sparking energy of windings switching and the mechanical condition of a commutator and bearings. The approach for evaluating the optimum pressure on the brush in order to increase its resource is offered. The real and the virtual lifetime tests of the universal motor considering changing of the mechanical state of the commutator and bearings during lifetime were carried-out. The constant force value acting on the brush which provides its lifetime increase by 11% is proposed.

Abstract: of preventive backside cleaning steps. These cleaning steps can be introduced after processes that generated high backside defect counts or right before a lithographic wafer exposure. In this study that was performed at imec’s 300mm cleanroom facility, the study objective was to evaluate the focus spot reduction performance of a stand-alone scrubber in a case study featuring known focus spot generating equipment sets. . In the first part of the study, monitoring of various production tools in terms of backside cross-contamination was done. A set of equipment’s that generated high backside defect counts was selected for generating adequate backside contaminated test material for the cleaning evaluation. This backside contaminated test material was used in our cleaning experiments and evaluation of focus spot reduction by performing leveling tests on an immersion scanner that was able to measure out of plane deviations.

Abstract: Brush scrubbing has been widely used in post chemical mechanical planarization (CMP) applications to remove contaminations, such as slurry residues and particles, from the wafer surface. During brush scrubbing, particle removal results from direct contact between a soft poly vinyl alcohol (PVA) brush and the wafer surface in which the brush asperities engulf the particles while the rotating motion of the brush, as well as the cleaning fluid at the surface, dislodge and carry the particles away from the wafer. The cleaning performance of brush scrubbing depends heavily on the choice of the cleaning solution and brush scrubber kinematics. In this work, the effect of various cleaning solutions and brush scrubber kinematics on the frictional attributes of post copper CMP cleaning process was investigated.