Papers by Keyword: Cr⁺⁶

Abstract: In order to reach the standard of the RoHS that the content of Cr6+ lower than 200ppm in ferrite, this reserch focused on the factors that influence on the content of Cr6+ during the preparation of Strontium Ferrite. The results show that the content of Cr6+ in Strontium Ferrit can be controlled among 91~117 ppm, and the optimum condition is as follows: the quality ratio of raw materials/graphite=10:1.25, the rate of the N2 flow 0.1~0.15 L/min, sintered temperature 950~1020°C, residence time 25~35min at the corresponding temperature point, granularity of the mixed system lower than 0.1~0.3mm.