Papers by Keyword: Grain Arrangement

Abstract: A grain-arranged diamond wheel was developed and grinding performance of the wheel against aluminum alloys and titanium alloy, Ti6Al4V, has been investigated using various kinds of grinding fluid. Mirror finishing of aluminum alloys was successfully performed without grinding burn when emulsion-type grinding fluid with an extreme-pressure additive was used. When oil base lubricants or a fatty acid was supplied using a MQL supply unit, fine finishing could not be done. Mesh size of the grinding wheel had only a minor effect on surface roughness. When Ti6Al4V was ground by the developed wheel, an adhesion of work material on diamond grains occurred causing the finished surface to deteriorate.

Abstract: A grain-arranged diamond wheel is developed and grinding performance of the wheel against industrial pure aluminum, one of the most hard-to-grinding materials, is investigated. The developed wheel efficiently ground pure aluminum without adhesion even when general-purpose grinding fluid, Type A3-1, was used. Moreover, wheel wear was not observed during the experiment, and grinding energy was extremely low. By using the developed wheel, a mirror surface can be easily obtained by one-pass surface grinding with very low table speed.