Papers by Keyword: Magnetic Filter

Abstract: In the traditional magnetic separation in dry conditions of magnetic filter jams caused by the efficiency of the machining decline. In order to solve this problem, filter arrangement in magnetic separation. Jam magnetic filter is success in reducing the through the use of prismatic-shaped filter. In addition, the separation effect of prismatic-shaped filters is added as high as, mesh filters used for high system routine.

Abstract: Arc ion plating(AIP) has higher deposition rates, whereas macro-particles (MPs) make the film properties decreasing. In this paper, AIP with or without magnetic filter (MF or AIP) and composition of AIP followed with magnetic filter (MFAIP) were designed to deposit TiN films on silicon (Si) and high-speed steel(HSS), respectively. Scanning electron microscope (SEM), nanoindentation and microscratch tests were investigated. SEM showed that both the MF and the MFAIP films had a superfine layer among the columnar crystals grown vertically against substrate surface. However, the columnar crystals of MF films were leptosomatic and well-orientational, while MFAIP ones were coarse and short, and even ragged in size and orientation. Nanoindentation test results showed the highest hardness for MF films and the lowest one for AIP films. A new parameter Scratch Crack Propagation Resistance (CPRs) was introduced to evaluate the film adhesion properties in a scratch test. MF films had the highest adhesion. AIP films were most susceptible to failure as the CPRs was the lowest, although the Lc1 was higher than MFAIP ones. It was proposed that the MPs were effectively removed with the MF, and the MF layers were superfine to improve the properties of the films.