Papers by Keyword: Pseudomonas fluorescens

Abstract: Comparison of the antimicrobial properties of textiles with amorphous coatings containing Zn and Si obtained by the sol-gel technology against microorganisms Pseudomonas fluorescens, Saccharomyces cerevisae, Trichoderma viride that can cause cotton textile destruction was made. Modified textile were evaluated using scanning electron microscopy, energy dispersive x-ray spectroscopy. Investigation of antimicrobial properties of the cotton fabric samples treated with different zinc acetate dihydrate concentration sols and various thermal post-treatments was made. Strong inhibition of microbial growth was detected for all cotton textile samples treated via sol-gel method according all tests microorganisms.

Abstract: The present study was undertaken to evaluate the feasibility of Pseudomonas fluorescens biomass for the removal of cadmium ions from aqueous solutions. Batch experiments were performed to study the adsorption of cadmium on pH, Pseudomonas fluorescens biomass adsorbent with respect to initial Cd(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Cd(II) was 66.25 mg/g (pH 5.0 and 5 g/L biomass dose). Kinetics of adsorption followed second-order rate equations. The FTIR results of Pseudomonas fluorescens biomass showed that biomass has different functional groups and these functional groups are able to react with metal ion in aqueous solution. The results of the present study suggest that Pseudomonas fluorescens biomass can be used beneficially in treating industrial effluents containing heavy metal ions.

Abstract: The optimal conditions of production of biopolymer by the culture of Pseudomonas fluorescens were examined, using brewery wastewater to replace glucose as carbon source and energy source in the culture medium. Results showed that the COD concentration in brewery wastewater favorable for the production of the biopolymer was 6000 mg•L-1, and an optimal culture condition of inoculum size of 5%(v/v), 28°C, initial pH 7.0 and shaking speed of 150 r•min-1, under the optimal culture conditions, the highest flocculating activity achieved for Kaolin suspension was 97.5% and 3.67 g biopolymer /L broth was obtained. The biopolymer was effective in flocculating some soluble reactive dyes in aqueous solution, reactive Light-Yellow K-4G and reactive Turquoise Blue KN-G with a decolorization efficiency of 95.8 and 96.2%, respectively，using 25 mL of the flocculant in 500 mL of 100 mg•L-1 dye solution.The decolorization efficiency was dependent on the flocculant dosage and solution pH.

Abstract: This work compares gold bioleaching from e-waste containing gold and copper by Chromobacterium violaceum and Pseudomonas fluorescens. The effect of pulp density (ranging from 0.5 to 8%w/v) was examined. Although C. violaceum produced more cyanide than P. fluorescens in the absence of e-waste, P. fluorescens showed higher growth rate, cyanide production and gold leaching efficiency at all pulp densities. Pretreatment with biooxidation of the e-waste using Acidithiobacillus ferrooxidans resulted in the removal in excess of 80% of the copper present in the waste, and increased the gold/copper ratio in the residual solid. Bioleaching the biooxidised e-waste significantly improved gold recovery, especially by C. violaceum, particularly at high pulp density. For example, at pulp densities of 2 and 4% w/v, gold recovery from non-biooxidzed e-waste was 0.22 and 0.14% respectively. Higher gold recovery, at 8%, was obtained for bioleaching of the biooxidised e-waste at both these pulp densities. The ratio of gold/copper in leachates after bioleaching of the biooxidized e-waste was also found to be increased.