Papers by Keyword: Texture Evolution

Abstract: Sheets of cold rolled (76%) IF steel were annealed at 650°C for 30min under a 12-tesla magnetic field. During the magnetic field annealing, they were placed at the center of the applied field respectively, being oriented differently with respect to the magnetic field direction. The results show that the high magnetic field annealing prevents the evolution from deformed {111}<110> texture component to recrystallized {111}<112> texture component at the initial stage of recrystallization. For the field annealed specimens, altering the specimen orientation to the magnetic field direction during annealing does not change the final annealing textures. The intensity of main {111} texture components presents a similar periodic variation with respect to the specimen orientation to the magnetic field.

Abstract: In this presentation, a novel phase field grain growth model combined with a micro-elasticity effect including elastic anisotropy and inhomogeity is presented to demonstrate the effect of micro-elasticity on grain growth and texture evolution. We report on texture evolution and abnormal grain growth induced by external elastic load from the viewpoint of micro-elasticity and first demonstrate that the previous mechanism (macroscopic viewpoint) on the effect of external elastic load on grain growth does not work in strain-controlled system. In contrast to the macro-elastic descriptions, strong localization of strain energy density and inhomogeneous distribution even inside grains are observed. Moreover, elastically soft grains with a higher strain energy density grow at the expense of the elastically hard grains to reduce the total strain energy. It is observed that strong <100>//ND fiber texture was developed in poly-crystalline Cu with initial random texture by biaxial external strain while <111>//ND fiber texture evolved in biaxial external stress condition. Even, grain growth of <100>//ND textured grains is occurred as abnormal grain growth when <100>//ND textured grains are surrounded by <111>//ND fiber textured grains.

Abstract: A dislocation density based crystal plasticity finite element model (CPFEM) is developed for aluminum in which dislocation densities evolve on all octahedral slip systems. Based upon the kinematics of crystal deformation and dislocation interaction laws, dislocation generation and annihilation are modeled. The CPFEM model is calibrated for pure aluminum using experimental stress-strain curves of pure aluminum single crystal from literature. Crystallographic texture predictions in plane-strain compression of aluminum are validated against experimental observations in the literature. The framework is implemented in ABAQUS with user interface UMAT subroutine. Dislocation densities evolve and are tracked as state variables in the model, leading to spatially inhomogeneous dislocation densities that show patterning in the dislocation structures.

Abstract: Electrical steels, in particular Fe-Si alloys, are used as magnetic flux carrier in transformers and motors because of their excellent magnetic properties. They owe these magnetic properties in part to the presence of specific texture components such as the Goss ({110} <001>) or the cube components ({001} <010>), but also to the chemical composition which is optimum with 6.5 wt. % Si. This high silicon content provides a stable BCC lattice structure to the alloy over the entire solid state domain, but also renders the material more brittle. This embrittlement, which is induced by ordering phenomena, makes it impossible to produce the alloy in a conventional rolling process unless a specific thermomechanical route at high temperature is applied. In order to examine the working behaviour of high Si electrical steels, a series of room temperature plane strain compression tests was carried out on a Fe-3%Si alloy in hot band condition. The samples were compressed with a constant strain rate of 20 s-1 to a reduction of 10, 35 and 70% and subsequently annealed for different times at 800 and 900°C in an electrical furnace without protecting atmosphere. The hot rolled microstructure displayed an average grain size of 195 7m and the texture showed on the cube component ({001} <010>) of maximum 5x random levels. After plane strain compression the samples developed the conventional α (<110> // RD) / γ (<111> // ND) fibre texture by plastic shear which was also accommodated, in part, by mechanical twinning. With regard to the annealed material, it was observed that the recrystallisation started in grains with the higher stored energy and within the shear bands. After a reduction of 70% the samples that were annealed at 800°C for 4 hours displayed an average grain size of 27 7m and a relative maximum of 4x random on the cube component. Also other less intense components such as the rotated cube ({001} <110>) and the Goss ({110} <001>) were present in the annealing texture. The samples that were annealed at 900°C, after a reduction of 70%, were characterized by an average grain size of 36 7m and by the appearance of the {111} <121> γ fibre component with an intensity of 4.7.

Abstract: Texture evolution in Mg-13wt%Li-X alloy cold-rolled from 1.35 mm to 0.34 mm thickness was investigated, by obtaining pole figures and orientation distribution functions (ODFs). Punching tests were conducted to reveal the effect of texture nature on formability. It was found that: (1) the textures of the as-received sheet are characterized by α fiber texture, a γ fiber texture and a cubic texture in both cold-rolled and annealed conditions; (2) with thickness reduction though rolling, the intensity of the γ fiber texture continuously increases and finally the γ fiber texture connects into {111} tube texture, the texture of <11 0> orientation flows towards {223}<11 0> along α fiber, the cubic texture of {001}<100> turns into {035}<100>, while some grains concentrate at {011}<41 1> orientation; (3) good punching behavior of the cold-rolled sheet corresponds to the appearance of a well-developed γ fiber texture.

Abstract: The kinetics and topology of grain growth in three dimensions were simulated using a phase-field model with anisotropic grain-boundary mobilities. In order to perform large scale calculations we applied both modifications of algorithms and parallel coding techniques to the Fan and Chen's phase-field algorithm. Kinetics of abnormal grain growth is presented. It is observed that the grains of a minor component which are at the beginning surrounded preferentially by boundaries of high mobility grow faster than the grains of a major component until the texture reverses completely. Additionally, topological results of grain structures, such as grain size distributions and grain face distributions, are discussed

Abstract: In order to study the influence of mechanical stress fields on the kinetics and texture evolution of grain growth, experiments were performed on high purity aluminium. Samples were annealed under the influence of different mechanical stresses. The temporal evolutions of grain sizes and of macrotexture were analysed in ependence on the applied stress. The results show that mechanical stresses can change the kinetics of grain growth and slow down the increase in the grain size. Also effects on the texture evolution were observed and shall be discussed.

Abstract: Using a processing path model based on the conservation principle in the orientation space explicit solutions can be formed linking any final (desired) microstructure to a given initial state for polycrystalline materials. The model uses texture coefficients in spherical harmonics expansion to as materials descriptors to represent the texture state of polycrystalline materials. In this work, the effect of increasing the maximum number of texture coefficients used in the series expansion (represented by Lmax) on the prediction of texture and its accuracy is fully studied.