Papers by Keyword: Vacuum-Induction Melting

Abstract: Multi-crystalline silicon ingots were prepared by directional solidification using vacuum induction melting furnace. The content of aluminum and iron deeply decreased in the columnar crystal region of the multi-crystalline silicon ingots. The columnar crystal growth broke off corresponded to the iron contents sharply increased. The height of columnar crystal in the silicon ingots related to the pulling rates had been clarified by the constitutional supercooling theory. The maximum of the resistivity and the minority carrier lifetime closed to the transition zone where the conductive type changed from p-type to n-type in silicon ingots. Further analysis suggested that the electrical properties were related to the contents of shallow level impurities aluminum, boron and phosphorus.

Abstract: The present study focuses on vacuum induction melting and investment casting of neargamma TiAl intermetallic alloys. The attention is mainly given to a cost-effective melting process in which a primary alloy ingot is re-melted in a ceramic crucible and cast into a ceramic shell mould. Two types of crucibles (based on Al2O3 and Y2O3) are considered. The most detrimental reactions that govern the contamination of the molten alloy with ceramic particles were determined. Results suggest that the crucible wall attack can be considerably limited by using either the Y2O3 (with no SiO2-type binder) or Al2O3 crucibles with a suitable coating. After pouring, a mechanical interaction associated with different thermal expansions of TiAl casts and ceramic shell moulds can result in serious product damage. A simple 1D-1D model of the cooling process was formulated and the heat flow as well as stress states in the cast-mould system were numerically solved. Process parameters (melt superheat, initial mould temperature, cooling kinetics and mould composition) were optimized in order to reduce the stress in the casts. The optimized parameters delimited a processing window in which complex-shaped TiAl castings like turbocharger wheels can be fabricated.