Papers by Author: Roman Drachev

Abstract: In this paper, we report on the synchrotron white beam topographic (SWBXT) observation of “hopping” Frank-Read sources in 4H-SiC. A detailed mechanism for this process is presented which involves threading edge dislocations experiencing a double deflection process involving overgrowth by a macrostep (MP) followed by impingement of that macrostep against a step moving in the opposite direction. These processes enable the single-ended Frank-Read sources created by the pinning of the deflected basal plane dislocation segments at the less mobile threading edge dislocation segments to “hop” from one slip plane to other parallel slip planes. We also report on the nucleation of 1/3< >{ } prismatic dislocation half-loops at the hollow cores of micropipes and their glide under thermal shear stress.

Abstract: A review is presented of Synchrotron White Beam X-ray Topography (SWBXT) studies of stacking faults observed in PVT-Grown 4H-SiC crystals. A detailed analysis of various interesting phenomena were performed and one such observation is the deflection of threading dislocations with Burgers vector c/c+a onto the basal plane and associated stacking faults. Based on the model involving macrostep overgrowth of surface outcrops of threading dislocations, SWBXT image contrast studies of these stacking faults on different reflections and comparison with calculated phase shits for postulated fault vectors, has revealed faults to be of basically four types: (a) Frank faults; (b) Shockley faults; (c) Combined Shockley + Frank faults with fault vector s+c/2; (d) Combined Shockley + Frank faults with fault vector s+c/4.

Abstract: Synchrotron White Beam X-ray Topography (SWBXT) imaging of wafers cut parallel to the growth axis from 4H-SiC boules grown using Physical Vapor Transport has enabled visualization of the evolution of the defect microstructure. Here we present observations of the propagation and post-growth mutual interaction of threading growth dislocations with c-component of Burgers vector. Detailed contrast extinction studies reveal the presence of two types of such dislocations: pure c-axis screw dislocations and those with Burgers Vector n₁c+n₂a, where n₁ is equal to 1 and n₂ is equal to 1 or 2. In addition, observations of dislocation propagation show that some of the threading dislocations with c-component of Burgers adopt a curved, slightly helical morphology which can drive the dislocations from adjacent nucleation sites together enabling them to respond to the inter-dislocation forces and react. Since all of the dislocations exhibiting such helical configurations have significant screw component, and in view of the fact that such dislocations are typically not observed to glide, it is believed that such morphologies result in large part from the interaction of a non-equilibrium concentration of vacancies with the originally approximately straight dislocation cores during post-growth cooling. Such interactions can lead to complete or partial Burgers vector annihilation. Among the reactions observed are: (a) the reaction between opposite-sign threading screw dislocations with Burgers vectors c and –c wherein some segments annihilate leaving others in the form of trails of stranded loops comprising closed dislocation dipoles; (b) the reaction between threading dislocations with Burgers vectors of -c+a and c+a wherein the opposite c-components annihilate leaving behind the two a-components; (c) the similar reaction between threading dislocations with Burgers vectors of -c and c+a leaving behind the a-component.

Abstract: Synchrotron White Beam X-ray Topography studies are presented of dislocation behavior and interactions in a new generation of seventy-six millimeter diameter, 4H-SiC wafers grown using Physical Vapor Transport under specially designed low stress conditions. Such low stress growth conditions have enabled reductions of dislocation density by two or three orders of magnitude compared to the lowest previously reported levels [1]. In this paper, detailed topography analysis will be presented of the deflection of threading dislocations with Burgers vectors of c and c+a onto the basal plane leading to reductions of the density of such dislocations down to levels of ~187 cm-2. The deflection of the latter type of dislocations produces complex faulted defect configurations and models for their creation are presented and discussed.

Abstract: Synchrotron White Beam X-ray Topography (SWBXT) studies are presented of basal plane dislocation (BPD) configurations and behavior in a new generation of 100mm diameter, 4H-SiC wafers with extremely low BPD densities (3-4 x 102 cm-2). The conversion of non-screw oriented, glissile BPDs into sessile threading edge dislocations (TEDs) is observed to provide pinning points for the operation of single ended Frank-Read sources. In some regions, once converted TEDs are observed to re-convert back into BPDs in a repetitive process which provides multiple BPD pinning points.

Abstract: The ability to set and accurately control the desired growth conditions is crucial in order to attain high quality bulk growth of Silicon Carbide (SiC), especially when the ingot size is large (> 2” in diameter by > 2” long). However, these two aspects of SiC PVT (Physical Vapor Transport) growth technology are severely limited in “conventional” SiC PVT growth reactors with single cylindrical heaters. To overcome such shortcomings, an “alternative” furnace design with two plane resistive heaters is proposed. In order to verify benefits of this design, numerical modeling and comparative procedures have been employed. Detailed comparative analysis revealed two fundamental disadvantages of the conventional furnace design, attributed to (a) – significantly higher in magnitude and spatially nonuniform distribution of the thermal stress that consequently deteriorates structural quality of the growing SiC boule, and (b) – inability to grow long (> 2”) monocrystalline ingots of SiC. Furthermore, the potential of the alternative furnace design to overcome fundamental limitations of the conventional design is also analyzed, with particular attention being paid to the processes of source material recrystallization.