Papers by Author: Shi Hai Sun

Abstract: In this paper, the structure and composition of multicrystalline silicon ingots prepared by directional solidification with different pulling rates were analyzed to investigate the effect of pulling rate on the multicrystalline silicon ingot. The results showed that the lower pulling rate will make the site taking place constitutional supercooling move to the upper part of ingots and make the high purity area become larger. Lowering the pulling rate will decrease the impurity effective segregation coefficient and the solid-liquid interface curvature.

Abstract: The distribution of resistivity, impurity and polarity in multicrystalline silicon ingot prepared by directional solidification method was detected. The effect of impurity distribution on resistivity was also researched. The results show that the shapes of equivalence line of resistivity in the cross section and vertical section of the silicon ingot depend on the solid-liquid interface. The resistivity in the vertical section increases with the increasing of solidified height at the beginning of solidification and reaches to maximum at the polarity transition point, then decreases rapidly with the increasing of solidified height and tends to zero on the top of the ingot because of the high impurity concentration. Study proves that the variation of resistivity in the vertical section is mainly relevant to the concentration distribution of the impurities such as Al, B and P in the growth direction.