Papers by Keyword: Grit Cut Depth

Abstract: In order to enhance the efficiency and the surface smooth degree of the RBSiC grinding, a three factors two levels full factorial design was utilized to optimize the process. Combined with the effects of grinding parameters on surface roughness, the grit cut depth analysis was employed to choose the appropriate grinding parameters. The strength reliability and the residual stresses of the RBSiC ground using the optimized parameters were investigated. The results show that comparing to the polished RBSiC the ground ones have higher compressive residual stress, lower crack scatter and similar average bending strength.

Abstract: A wire-saw cut KDP crystal geometrical model was founded and a mathematical model was established to calculate the grit average cut depth, based on indentation fracture mechanics theory(IFMT). The relationship between the grit cut depth and wire saw process parameter was analyzed theoretically. The research results indicate that there exists an approximate monotone increasing non-linear correlation between grit average cut depth and the ratio i value of crystal feed speed and wire speed. By increasing the wire speed and crystal feed speed accordantly, the value of i can be maintained invariable, however, this way can simultaneously bring higher machined surface quality and machining efficiency.

Abstract: A mathematical model to calculate the grit average cut depth in wire sawing single crystal silicon was founded. So the grit average cut depths were calculated theoretically by choosing different process parameters, and influences of process parameters on grit cut depths of slicing silicon crystal were analyzed. Analysis results indicate that the grit average cut depth relates to the silicon mechanical properties, grit shape and size, wire speed and ingot feed speed, etc. And there is a monotone increasing non-linear correlation between grit average cut depth and the ratio i value of ingot feed speed and wire speed, when the i value is lower, the average grit cut depth is lower.